Hunter 40.5 Throughulls and Seacocks

[SVREMIINISCE]

So I've searched and searched and have found no answers so I'm hoping someone on here can recommend ideas or have done this.

I'm going to haul out in a boatyard to do my bottom in two weeks....the catch is there will be NO access to any parts or supplies without resplashing the boat and coming back to the US.

I would like to replace all the throughulls and seacocks on my 1993 Hunter 40.5 and cannot find any information on sizes. Unfortunately I'm currently 1,000 miles from the boat so visually measuring anything is not an option.

Off the top of my head there are 8(?) total: 2 forward head, 1 under galley, 1 in keel, 3 in rear head and 1 under rear berth for the engine.

I'm hoping someone has done these, saved the measurments or know them and can chime in or else.....

If you had one shot at this, what size throughulls and seacocks would you purchase? I've never done this but it appears there's 4 different throughull sizes that would be applicable (1", 1.25", 1.5", 1.75") but the seacock sizes are based on outlet hose size(?) which I would guess at 1", 1.25", 1.5".

Any advice, experience would be helpful.

Thanks in advance!

Dave