New LPG Flare fitting for hose

[wholybee]

The Nut on the 3/8" Flare fitting on the hose that connects my regulator/solenoid to my stove is cracked. Cracked at the solenoid end. The hose itself is rather long, and essentially built into the boat. Replacing the whole hose would be a serious job.

I would like to cut the fitting off the end of the hose and install a new one. I do understand this is to be a crimp connection, and not a clamp connection. But I can't seem to source either.

Is there an online source for these connectors?
-warren

[gonesail]

Probably requires a special crimping wrench for the pressed fitting. I see that Trident Marine sells them. But will they work for your hose?