Inspecting shroud base

[Amuse]

I have a 2007 Dehler 39SQ (in Spain). When I get back to the boat I need to check all the rigging of my Selden mast, but I cannot get these cover plates off so that I can clean and inspect the shroud anchorages.

Can anyone tell me how they have been able to remove these cover plates.

[slug]

Originally Posted by Amuse

I have a 2007 Dehler 39SQ (in Spain). When I get back to the boat I need to check all the rigging of my Selden mast, but I cannot get these cover plates off so that I can clean and inspect the shroud anchorages.

Can anyone tell me how they have been able to remove these cover plates.

I can’t tell the manufacture of your rigging

It looks like BSI

that type of chain plate , tip cup style is normally taken apart from the bottom

Look underneath ..inside the boat

Perhaps two locking screws , then the male part unscrews

Several different variations, you will understand when you inspect underneath