Kenyon 4960 mast spreaders

[Jeffmg]

I'm in the middle of a refit of a 1972 Allied Seawind 30 and when the boat was trucked the spreaders were destroyed
I'm wondering if anyone knows of a source for this type of spreader

they aren't airfoils or round sections, more like ellipses that taper off into round sections.

I'd love to not have to replace my spreader bases as well

I called Kenyon and they don't have any record of using this type of spreader on any of their masts so their origin is a mystery

they measure 2 11/16" by 1 1/2" at the base and are 42" long

any help would be appreciated, if anyone recognizes these as a brand or if they are made anymore

thanks

Jeff

[neilpride]

http://www.google.es/url?sa=t&rct=j&...25596728,d.d24


Try here, good luck.

[Jeffmg]

Rigrite/Kenyon does not have these types of spreaders
the ones on the website as shown for that type of mast section are a conventional round tube spreader section of which they only have Starboard side bases left for

I'm looking for an alternative to Kenyon, as it seems they did not make this spreader, or just any information as to what kind it is or who makes it

thanks for the response

Jeff

[neilpride]

Look for something similar in length and strength if you don't found the OEM parts, to make a couple of new spreaders is not a hard job , basic you need to see what kind of spreaders brackets they are and the mast profile, the rest its a easy job....Cheers.