ABI Windlass Gypsy

[Offpath]

I have an ABI 800 two speed manual windlass- works great, but I want to swith from 3/8 to 5/16 chain and am in search of a gypsy. Any thoughts on where to look? I've seen the SL parts site where I can get the correct sized gypsy for the 555 sea tiger, but the brake pads are slightly different from the ABI clone.

Thanks for any thoughts!

[SkiprJohn]

I tried to track down a place to have a gypsy machined for an ABI and ran across Plath in Portland, Oregon that would do it. Depending on where you are in the world that might be an ok option. Good luck. I believe nearly all ABI were set up for 3/8" proof coil and anything different is really hard to find.

RC Plath Products

[Offpath]

Thanks for the link John, I've sent off an inquiry - see what I hear back.

[SkiprJohn]

Originally Posted by Offpath

Thanks for the link John, I've sent off an inquiry - see what I hear back.

I called and talked with them and if I had not been in Hawaii I would have had them help me with my project. Just too hard from long distance when shipping is an issue..

[GordMay]

Greetings and welcome aboard the CF, Offpath.

[Raggedglory]

Hi Offpath, was wondering how you made out with your gypsy conversion.
I also have just bought a bought with an ABI bronze windlass however the previous owner was using the incorrect chain and after many years the teeth are worn down and of course the chain slips.
I am interested in buying a 3/8" gypsy for replacement or failing that perhaps brazing and rebuilding what i have.
Bottom line, you interested in selling your 3/8" gypsy?

[karlbischoff]

Hello. Did you find a 3/8 gypsy? I just bought a used ABI bronze windlass that I need to convert to 5/16. I would love to sell the 3/8. Thanks.

[Raggedglory]

Originally Posted by karlbischoff

Hello. Did you find a 3/8 gypsy? I just bought a used ABI bronze windlass that I need to convert to 5/16. I would love to sell the 3/8. Thanks.

Hi, send me a p.m. and we can discuss. I have put out enquiries to machine shops on rebuilding but to date no responses.
Mind you i just took off my gypsy.

[gjordan]

Just as a note! the Blue Pelican Consignment shop in Alameda Calif bought out the remaining ABI inventory I dont know what they have but you might want to call them and ask. Blue Pelican 510-769-4858 _____Grant.

[Raggedglory]

Originally Posted by gjordan

Just as a note! the Blue Pelican Consignment shop in Alameda Calif bought out the remaining ABI inventory I dont know what they have but you might want to call them and ask. Blue Pelican 510-769-4858 _____Grant.

Thanks grant i shall do. Cheers.

[Briney Bug]

You may not have to switch gypsies. We've been using 5/16 NACM chain in an ABI windlass with a 3/8 gypsy for over 20 years without any problem.

[Raggedglory]

Originally Posted by Briney Bug

You may not have to switch gypsies. We've been using 5/16 NACM chain in an ABI windlass with a 3/8 gypsy for over 20 years without any problem.

Trouble with my gypsy is that the previous owner used undersized chain link length which caused wearing off of all sprocket teeth on the back side of the sprockets.
Now no chain will wind in. I need to rebuild or to replace.
Thanks for your info.