Help understanding Windlass setup

[InsuredApple]

I'm getting ready (mentally) to install a Lofran's GALAXY 503 chain counter remote, by understanding the current setup. From what I can tell our windlass setup is composed of...

Lofran's Falkon Windlass
Quick Wired Remote HRC1002
imtra SPA-10824 - Windlass Control Box
Quick 1002P / T6315 Solenoid Unit

But I don't entirely understand how the Quick 1002P solenoid fits into the picture.

Any thoughts?

I'll start tracing wires, but that will take a bit of time.

[GordMay]

Quick HRC Hand Held Remote Control Users’ Manual ➥ https://www.go2marine.com/docs/9/4/1/9/94198F-i.pdf

[InsuredApple]

Originally Posted by GordMay

Quick HRC Hand Held Remote Control Users’ Manual ➥ https://www.go2marine.com/docs/9/4/1/9/94198F-i.pdf

I reached out to Quick and they provided me with the official manual for the Quick remote that I have (HRC1002), but the manual does not mention a solenoid unit anywhere.

[GordMay]

The solenoid(s) are in the Falcon “Control Box”.
The wiring diagram is on page 14 of the Installation And User's Manual, downloadable
Here ➥ https://www.lofrans.com/product/4-Lo...ss/5008-falkon

[InsuredApple]

Originally Posted by GordMay

The solenoid(s) are in the Falcon “Control Box”.
The wiring diagram is on page 14 of the Installation And User's Manual, downloadable
Here ➥ https://www.lofrans.com/product/4-Lo...ss/5008-falkon

I can not find any diagrams that include the "Quick 1002P / T6315 Solenoid" that we have installed.

From what I understand, these 3 components make up the windlass setup...

Lofran's Falkon Windlass <-> imtra SPA-10824 Windlass Control Box <-> Quick Wired Remote HRC1002

Sorry. It's really hard for me to download files. Our data connection is really slow... 16kb/sec MAX... so things take quite some time.