Quick Genius windlass 1100 disassembling

[sergvg]

Hello, friends.
I have a problem with Quick Genius 1100 (2007 year of manufacture). Speed was lower than normal and now there is no reaction on the switch.
I removed it from the boat and connected it directly to the battery. I does not work. I suspect the motor brushes need to be replaced.
I unscrewed all the screws, but had no success for disassembling.
Does anyone know how to disassemble the windlass? Has anyone the same experience? Or maybe were is technical manual for repairing. I didn't find anything like it on the internet.
And the second question. What the type of lubricant is used inside the windlass?

[GordMay]

Greetings, and welcome aboard the CF, sergvg.
Hope this helps:
Quick “Genius” [600, 1000, 1100] Manual ➥ https://www.windlass-anchor.com/v/vs...000-1100-f.pdf

[sergvg]

Originally Posted by GordMay

Greetings, and welcome aboard the CF, sergvg.
Hope this helps:
Quick “Genius” [600, 1000, 1100] Manual ➥ https://www.windlass-anchor.com/v/vs...000-1100-f.pdf

Thank you for the unswer. There are not any words about inside maintenance. Is it no need during whole life of the windlass?
I recheck manual I assume my windlass is Quick Genius 600D or 1000D. Not 1100.

[more]

https://www.youtube.com/watch?v=8L-1Huk6z48

first remove all bolt. after disable all ,clean,repair assemble,test,return on boat.
hammer is your friend or trash can

[sergvg]

Originally Posted by more

first remove all bolt. after disable all ,clean,repair assemble,test,return on boat.
hammer is your friend or trash can

Thanks for the link. I will try.

[sergvg]

Previous owner glued the winch body with a strong sealant. He changed brushes some years ago.
One of the magnet inside the motor broke off and jammed. I clean the motor body, connected brushes and the motor is now running.