Rocna or Vulcan 25Kg fit Oceanis 42cc 2005

[squirty34]

Hello all.

Does anyone know if either of these fits the standard roller. It is unmodified from the factory, currently with a 20Kg cqr. Or Mr Draggy as he is known on our boat.

Andy

[bvander]

Go to their website and they have a downloadable template to make one from cardboard to do a trial fit. Typically a Rocna will fit nicely on a roller designed for a delta or cqr if not coming through a slot. If the actuall roller is close to the furler drum the roll bar might have interference. Depending in where you live some marine stores will allow you to take an anchor to test fit.

[squirty34]

Thanks. Sadly many miles from boat currently, but wanting to order it so it is there when we are back to the boat in May. Anyone with any experience with our type of boat?

[Spade Anchor]

Our Spade ANchor has a shank curvature that is meant to be a direct replacement for Mr Draggy ( CQR)! So we will fit nicely.

We currently have a promo that can offer up to 30% off of select Galvanized Spade Anchors in the USA. Call me for details.