Aviation headset with M802?

[mstr_cmdr]

Originally Posted by SVPP

How are you going to hear if someone is trying contacting you, if it is plugged in? A question not a snipe.

The audio output from the M802 is either via a headphone jack on the front panel of the control panel or via a speaker audio jack on the rear of the transceiver unit.

Plugging a headset into the audio jack on the control panel will NOT switch off the audio output to the remote speaker - you need to wire a separate switch (ON/OFF) into the remote speaker circuit cable.

To answer the question:
You will be able to hear someone calling you provided the remote speaker is not switched off, irrespective if a headset is plugged into the audio jack on the front of the control panel.

[GILow]

Originally Posted by mstr_cmdr

Plugging a headset into the audio jack on the control panel will NOT switch off the audio output to the remote speaker - you need to wire a separate switch (ON/OFF) into the remote speaker circuit cable.

Not quite. You can switch the remote speaker on and off from the front panel of the radio. You do not need a separate switch.