can any one id these radar connections

[ventura 38]

just bought a 30' Erickson the radar was removed but the mount and wiring remained. here are the pics of the connections. can any one id the make and model of the radar that uses these connections. would like to buy the same make and model that fits these connections.

[smac999]

that's a garmin network connecter. you must mean the display? the red one is not a radar cable. probably power / data for a display. at the radar, it'll only have 2 pins plus the other end of that network cable.

[savoir]

They look more like the connectors for a GPS/chartplotter remote display unit. Maybe 7" or !0" screen. They don't look like radar cables.

Very few 30 footers in Florida have radar. They don't need it.

[zboss]

Definitely garmin radar.

[Sailmonkey]

I concur, Garmin Ethernet radar. The big connector is for power and data, the cat5 cable goes up the mast.

If the scanner has been removed for a length of time the pins on the mast end of the cat5 cable may be shot anyway.

On edit, I see that the molded ends are readily available.
https://m.newegg.com/products/0SM-0003-00021

[JDeachman]

They look the same as on my Furuno system. Double cable from the radar unit down to the multi-function display.

[smac999]

Originally Posted by JDeachman

They look the same as on my Furuno system. Double cable from the radar unit down to the multi-function display.

No they are snap together Garmin plugs.

[JDeachman]

SMAC99 - Sorry, I was focused on the plugs themselves instead of the connectors. You are correct I'm sure.