For Sale - dAISy 2+ dual-channel AIS Receiver

[AnsleyS]

dAISy 2+ dual-channel AIS Receiver with NMEA 0183 output

[IMG]file:///C:/Users/user/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg[/IMG]

[IMG]file:///C:/Users/user/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg[/IMG]

[IMG]file:///C:/Users/user/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg[/IMG]



I have updated to NMEA2000 so this unit is for sale. The description from the maker follows:


This AIS receiver is built for boaters. Compact, robust, and with all the interfaces you need. Thanks to its two-channel design, the dAISy 2+ receives about 40% more messages than the cheaper single-channel dAISy. This improves acquisition time and update rate of AIS targets, while range is comparable for both models.
Specification

• Dual channel receiver
• Receiving on channel A (161.975 MHz) and B (162.025 MHz) simultaneously
• 38400 baud serial output over USB in industry standard NMEA format (AIVDM)
• NMEA 0183 output at 4800, 9600 or 38400 baud for connection to chart plotters
• Auxiliary TTL serial output for connection to other devices
• BNC connector for 50 Ohm VHF antenna (antenna not included)
• Mini-USB connector for data and power (3ft USB cable included)
• 5mm pitch terminal block for NMEA (matching plug with screw terminals included)
• Can be powered over USB or from a 12-36V DC power source
• Low power consumption, less than 500mW in receive mode (<100mA at 5V, <40mA at 12V)
• Very robust aluminum enclosure with mounting holes, size: 105 x 80 x 28mm
• Made in the USA

Includes:

AIS over WiFi with the DT-06 WiFi module
The auxiliary serial port is pin-compatible with the inexpensive DT-06 WiFi module. With the module,
dAISy 2+ can make data available wirelessly to mobile devices like laptops, tablets and smartphones.




$ 85 and shipping from Maine