Icom M710

[eric42]

I am installing a second hand Icom M710 and the control cable to the AT 130E tuner has been cut above the connector leaving only red/black/white and green inner core. I can only find labels in the manual for ANTC, 13.6, Star and Key.
The diagram of the AT 130E gives an indication of the position of the wires but I have to identify the corresponding colours. Can anybody help?

[wsmurdoch]

The AT-130E service manual is in the Yahoo Icom M710 group files. https://groups.yahoo.com/neo/groups/.../files/AT-130/ It shows the wire positions in both connectors of the control cable. You might join the group for additional help.

Bill

[Brian.D]

If you can't access that User Group for the manual, you can get it here...
http://www.radiomanual.info/schemi/I...T-140_serv.pdf

I would take out the old butchered cable and replace it with a new DIY cable (page 4-1).

[eric42]

Thanks for your replies.
Unfortunately the manuals do not help as the control cable should come with a fixed plug. The manuals for the m710 and AT130E only refer to the connections ( antc, 3.6, star, key), not the wire colour.
The control cable signals (terminal info) section 4 in the AT130E manual shows the wire connections with no colour.
I think the only solution is for someone to open an AT130E and give me a photo of the board connection of the control cable.

At this point I have to find a home for a red ,black ,green and white wire, that come from a soldered connection on a board on the M710 and need to connect to the AT130E.

Can anyone give me the name of a service centre who may be helpful?
Nic

[wsmurdoch]

Perhaps at the top right corner of page 8-3 of the Icom IC-M710 Service Manual which is also in the Yahoo Group file section?

Bill

[Brian.D]

Look at page 3 https://www.google.com/url?sa=t&rct=...QueW1LH9E9RyHj
It has colors for the wires.

[RaymondR]

I do know you have to get the wiring right as there is a fuse inside the case which blows if you get them reversed.

[eric42]

Thanks for all the help and info. I have now sorted the colours and all is up and running.
many thanks
Nick