New iPad Pro upgrade can’t connect to Wi-fi multiplexer

[john5726]

Hi all I’ve recently upgraded to I new iPad Pro from a 2014 iPad Air 2, I run iNavx via a Brookhouse iMux st which worked perfectly with my iPad Air 2. The problem is I’ve copied the Wi-fi settings from the old iPad to the new one and the TCP/IP ie 169.254.1.1 port 2000. I think it’s some thing to do with the the Wi-fi settings I’ve manually input 169.254.1.2 sub mask 255.255.0.0 as per original instructions however the options are not there for static tab as before. Both iPads are on IOS14.6
I would really appreciate any assistance anyone could offer 👍

[john5726]

Found the fault, faulty Brookhouse iMux st until, brought quark-elec QK-A033 worked straight out the box very well built fantastic support highly recommended these guys.

[ChristianV]

Have spend huge time before getting my Quark A031 work with iPad. The WiFi connection to Quark multiplexer kept dropping after couple of minutes. Eventually noticed you need turn off 'smart connection' or a similar thing on iPad. iPad regualarly check the Internet connection if the current WiFi doesn't support Internet it will automatically swith to other WiFi network or mobile connection

[jordanbigel]

Originally Posted by ChristianV

Have spend huge time before getting my Quark A031 work with iPad. The WiFi connection to Quark multiplexer kept dropping after couple of minutes. Eventually noticed you need turn off 'smart connection' or a similar thing on iPad. iPad regualarly check the Internet connection if the current WiFi doesn't support Internet it will automatically swith to other WiFi network or mobile connection

Eventually noticed you need turn off 'smart connection' or a similar thing on iPad.

I think you mean "auto-join hotspot"?