Raymarine cable nomenclature confusion

[Hoghead]

I am changing from a Ray C90w to a Ray eS127 and the cables appear different.

Part of my problem is that I am trying to do this from afar, and ship the parts to the Philippines, where I am knackered if I do not get it right.
Help in getting the right parts would be greatly appreciated!

Currently I have 2 x STHS (presumably SeaTalk HS) male cables going into the old unit + a Power/Data Cable (+ video??)

The eS 127 has:
Power/NMEA/Video
1 x NMEA2000/Seatalk NG
2 x Seatalk hs / RayNet

Will my old hs cables plug directly into the eS127 SeaTalk hs / RayNet plug or are the new fittings different? The on-line manual suggests that while the name is the same the plug is different.
I am guessing that I need A-80160 adaptor cables but need confirmation
Mine look like a LAN plug in a Ray specific waterproof plug.

Is the old Power/NMEA/Video plug the same as the new one?
Again the manual drawing and mine look diffferent

One would think that the same named connector would be the same........

[smac999]

no the new network ones are round pin style. you'll need a seatalk HS to raynet adapters. the ones you posted look right.

the old screen is likly using seatalk to connect to gps ant. and possible other things (pilot, st 60 gauges etc) the new one doesn't look like it has seatalk. but it probably has a built in gps. you'd have to know what exactly the old one was connected too via data. you may need a seatalk to seatalkNG adapter to make the old seatalk stuff talk. but you may not have or need any.

the power defiantly not same. cut old cable off, and replace with the one it comes with.