Raymarine i60 needs to be master not repeater

[Harry2208]

Hi. I have a Raymarine i60 that the wind transducer wires go directly to. The manual says it should be set to master not repeater. It tells me how to check setting but not how to change it. Tried Raymarine forum, not getting any answers. Tried factory reset.

[AnsleyS]

Harry,


from the manual:


Checking the instrument status From the software version page: 1.Press the Power button. The instrument status is displayed (r0=masterandr1=repeater). The instrument status page will time-out automatically after 8 seconds of inactivity.

[Harry2208]

As I said I found in the manual how to see what it is set on. What I can't find in the manual is how to change it.