Simrad to B&G - adding an extra network port

[stulk75]

I’ve replaced 3 bad Simrad multi-function displays (MFD) with 3 new B&G Triton2 MFDs. The new ones are working great, but I have lost two connector ports as the old Simrad displays had a NMEA “out”, so they were daisy chained to an autopilot control and a display. The B&Gs just have a single input.

On the port side of my boat I see the network switch, but all the ports are used. Can I just add a t-connector like this: https://www.simrad-yachting.com/simr...mnet-bulkhead/ or this: https://www.marineelectronics.com/pr...ad-t-connector to get the extra port I need? The starboard side has the room for an extra cable.