Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Seamanship, Navigation & Boat Handling > OpenCPN
Reload this Page OpenCPN Radar Overlay PlugIn
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
Page 25 of 61 « First 152324 25 262735 Last »
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rating: Thread Rating: 5 votes, 4.80 average. Display Modes
Old 17-12-2013, 17:23   #361
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
attached is the wireshark file. I get the .pdf extension now
Attached Files
File Type: pdf wireshark1.pcapng.pdf (10.0 KB, 68 views)
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 17:26   #362
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
and log file

15:03:49: 2013-12-17
15:03:49: ------- Starting OpenCPN -------
15:03:49: Version 3.2.2 Build 2013-05-08
15:03:49: wxWidgets version: wxWidgets 2.8.12
15:03:49: MemoryStatus: mem_total: 8075 mb, mem_initial: 9 mb
15:03:49: SData_Locn is C:\Program Files (x86)\OpenCPN\
15:03:49: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
15:03:49: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
15:03:49: No styles found at: C:\ProgramData\opencpn\
15:03:49: No styles found at: C:\ProgramData\opencpn\.opencpn\
15:03:49: Setting Viewpoint Lat/Lon 28.4088, -80.6783
15:03:49: Setting Ownship Lat/Lon 28.4082, -80.678
15:03:49: System default Language: en_US
3:03:49 PM: Opencpn language set to: en_US
3:03:50 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
3:03:50 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
3:03:50 PM: Setting Viewpoint Lat/Lon 28.4088, -80.6783
3:03:50 PM: Setting Ownship Lat/Lon 28.4082, -80.678
3:03:50 PM: Opening NMEA Datastream Serial:COM3
3:03:50 PM: Opening NMEA Datastream Serial:COM4
3:03:50 PM: Opening NMEA Datastream Serial:COM5
3:03:50 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
3:03:50 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
3:03:50 PM: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll Version detected: 108
3:03:50 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
3:03:50 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
3:03:50 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
3:03:50 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
3:03:50 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
3:03:50 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
3:03:50 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
3:03:50 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
3:03:50 PM: OpenGL-> Detected Intel renderer, disabling FBO
3:03:50 PM: OpenGL-> Framebuffer Objects unavailable
3:03:50 PM: OpenGL-> Using Depth buffer clipping
3:03:50 PM: OpenGL-> Estimated Max Resident Textures: 98
3:03:50 PM: ChartDB Cache policy: Application target is 1024 MBytes
3:03:50 PM: Loading chart db version: V017
3:03:50 PM: Chartdb: Chart directory list follows
3:03:50 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
3:03:50 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
3:03:50 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
3:03:50 PM: GPS Watchdog Timeout is: 6 sec.
3:03:50 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
3:03:50 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
3:03:51 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
3:03:51 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
3:03:51 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
3:03:51 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
3:03:52 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
3:03:52 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
3:03:52 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
3:03:52 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
3:03:57 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
3:03:57 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
3:03:57 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
3:04:00 PM: EnumerateSerialPorts() Found Garmin USB Driver.
3:04:08 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
3:04:12 PM: Closing NMEA Datastream Serial:COM3
3:04:12 PM: Closing NMEA Datastream Serial:COM4
3:04:12 PM: Stopping Secondary Thread
3:04:13 PM: Stopped in 1 sec.
3:04:13 PM: Closing NMEA Datastream Serial:COM5
3:04:13 PM: Stopping Secondary Thread
3:04:14 PM: Stopped in 1 sec.
3:04:14 PM: Opening NMEA Datastream Serial:COM3
3:04:14 PM: Opening NMEA Datastream Serial:COM4
3:04:15 PM: Opening NMEA Datastream Serial:COM5
3:04:15 PM: Closing NMEA Datastream Serial:COM3
3:04:15 PM: Closing NMEA Datastream Serial:COM4
3:04:15 PM: Stopping Secondary Thread
3:04:16 PM: Stopped in 1 sec.
3:04:16 PM: Closing NMEA Datastream Serial:COM5
3:04:16 PM: Stopping Secondary Thread
3:04:17 PM: Stopped in 1 sec.
3:04:17 PM: Opening NMEA Datastream Serial:COM3
3:04:17 PM: Opening NMEA Datastream Serial:COM4
3:04:17 PM: Opening NMEA Datastream Serial:COM5
3:04:50 PM: LOGBOOK: 2013-12-17 20:04:50 UTC GPS Lat 28.40802 Lon -80.67806 COG 201.00000 SOG 2.00
3:28:37 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
3:28:38 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
3:28:38 PM: opencpn::MyFrame exiting cleanly.
3:28:38 PM: Closing NMEA Datastream Serial:COM3
3:28:38 PM: Closing NMEA Datastream Serial:COM4
3:28:38 PM: Stopping Secondary Thread
3:28:39 PM: Stopped in 1 sec.
3:28:39 PM: Closing NMEA Datastream Serial:COM5
3:28:39 PM: Stopping Secondary Thread
3:28:40 PM: Stopped in 1 sec.
3:28:40 PM: Chart cache purge
3:28:40 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
3:28:40 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
3:28:40 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
3:28:40 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
3:28:40 PM: Chart cache purge
3:28:40 PM: LOGBOOK: 2013-12-17 20:28:40 UTC OFF: Lat 28.40822 Lon -80.67797 COG ----- SOG 0.00
3:28:40 PM: opencpn::MyApp exiting cleanly...

17:01:37:

________

17:01:37: 2013-12-17
17:01:37: ------- Starting OpenCPN -------
17:01:37: Version 3.2.2 Build 2013-05-08
17:01:37: wxWidgets version: wxWidgets 2.8.12
17:01:37: MemoryStatus: mem_total: 8075 mb, mem_initial: 8 mb
17:01:37: SData_Locn is C:\Program Files (x86)\OpenCPN\
17:01:37: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
17:01:37: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
17:01:37: No styles found at: C:\ProgramData\opencpn\
17:01:37: No styles found at: C:\ProgramData\opencpn\.opencpn\
17:01:37: Setting Viewpoint Lat/Lon 28.4094, -80.6767
17:01:37: Setting Ownship Lat/Lon 28.4082, -80.678
17:01:37: System default Language: en_US
5:01:37 PM: Opencpn language set to: en_US
5:01:37 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
5:01:37 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
5:01:37 PM: Setting Viewpoint Lat/Lon 28.4094, -80.6767
5:01:37 PM: Setting Ownship Lat/Lon 28.4082, -80.678
5:01:37 PM: Opening NMEA Datastream Serial:COM3
5:01:37 PM: Opening NMEA Datastream Serial:COM4
5:01:37 PM: Opening NMEA Datastream Serial:COM5
5:01:38 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
5:01:38 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
5:01:38 PM: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll Version detected: 108
5:01:38 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:01:38 PM: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll Version detected: 108
5:01:38 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:01:38 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
5:01:38 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:01:38 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
5:01:38 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:01:38 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
5:01:38 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
5:01:38 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
5:01:38 PM: OpenGL-> Detected Intel renderer, disabling FBO
5:01:38 PM: OpenGL-> Framebuffer Objects unavailable
5:01:38 PM: OpenGL-> Using Depth buffer clipping
5:01:38 PM: OpenGL-> Estimated Max Resident Textures: 98
5:01:38 PM: ChartDB Cache policy: Application target is 1024 MBytes
5:01:38 PM: Loading chart db version: V017
5:01:38 PM: Chartdb: Chart directory list follows
5:01:38 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
5:01:38 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
5:01:38 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
5:01:38 PM: GPS Watchdog Timeout is: 6 sec.
5:01:38 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
5:01:38 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
5:01:38 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
5:01:38 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
5:01:43 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:01:43 PM: opencpn::MyFrame exiting cleanly.
5:01:43 PM: Closing NMEA Datastream Serial:COM3
5:01:43 PM: Closing NMEA Datastream Serial:COM4
5:01:43 PM: Stopping Secondary Thread
5:01:44 PM: Stopped in 1 sec.
5:01:44 PM: Closing NMEA Datastream Serial:COM5
5:01:44 PM: Stopping Secondary Thread
5:01:46 PM: Stopped in 2 sec.
5:01:46 PM: Chart cache purge
5:01:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
5:01:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:01:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:01:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:01:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:01:46 PM: Chart cache purge
5:01:46 PM: LOGBOOK: 2013-12-17 22:01:46 UTC OFF: Lat 28.40820 Lon -80.67800
5:01:46 PM: opencpn::MyApp exiting cleanly...

17:02:02:

________

17:02:02: 2013-12-17
17:02:02: ------- Starting OpenCPN -------
17:02:02: Version 3.2.2 Build 2013-05-08
17:02:02: wxWidgets version: wxWidgets 2.8.12
17:02:02: MemoryStatus: mem_total: 8075 mb, mem_initial: 8 mb
17:02:02: SData_Locn is C:\Program Files (x86)\OpenCPN\
17:02:02: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
17:02:02: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
17:02:02: No styles found at: C:\ProgramData\opencpn\
17:02:02: No styles found at: C:\ProgramData\opencpn\.opencpn\
17:02:02: Setting Viewpoint Lat/Lon 28.4094, -80.6767
17:02:02: Setting Ownship Lat/Lon 28.4082, -80.678
17:02:02: System default Language: en_US
5:02:02 PM: Opencpn language set to: en_US
5:02:02 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
5:02:02 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
5:02:02 PM: Setting Viewpoint Lat/Lon 28.4094, -80.6767
5:02:02 PM: Setting Ownship Lat/Lon 28.4082, -80.678
5:02:02 PM: Opening NMEA Datastream Serial:COM3
5:02:02 PM: Opening NMEA Datastream Serial:COM4
5:02:03 PM: Opening NMEA Datastream Serial:COM5
5:02:03 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
5:02:03 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
5:02:03 PM: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll Version detected: 108
5:02:03 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:02:03 PM: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll Version detected: 108
5:02:03 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:02:03 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
5:02:03 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:02:03 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
5:02:03 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:02:03 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
5:02:03 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
5:02:03 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
5:02:03 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
5:02:03 PM: OpenGL-> Detected Intel renderer, disabling FBO
5:02:03 PM: OpenGL-> Framebuffer Objects unavailable
5:02:03 PM: OpenGL-> Using Depth buffer clipping
5:02:03 PM: OpenGL-> Estimated Max Resident Textures: 98
5:02:03 PM: ChartDB Cache policy: Application target is 1024 MBytes
5:02:03 PM: Loading chart db version: V017
5:02:03 PM: Chartdb: Chart directory list follows
5:02:03 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
5:02:03 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
5:02:03 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
5:02:03 PM: GPS Watchdog Timeout is: 6 sec.
5:02:03 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
5:02:04 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
5:02:04 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
5:02:04 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
5:02:04 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIVLW to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
5:02:04 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
5:02:13 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
5:02:13 PM: EnumerateSerialPorts() Found Garmin USB Driver.
5:02:23 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
5:02:47 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:02:47 PM: opencpn::MyFrame exiting cleanly.
5:02:47 PM: Closing NMEA Datastream Serial:COM3
5:02:47 PM: Closing NMEA Datastream Serial:COM4
5:02:47 PM: Stopping Secondary Thread
5:02:48 PM: Stopped in 1 sec.
5:02:48 PM: Closing NMEA Datastream Serial:COM5
5:02:48 PM: Stopping Secondary Thread
5:02:49 PM: Stopped in 1 sec.
5:02:49 PM: Chart cache purge
5:02:49 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom gradar_pi.dll
5:02:49 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:02:49 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:02:49 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:02:49 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:02:49 PM: Chart cache purge
5:02:49 PM: LOGBOOK: 2013-12-17 22:02:49 UTC OFF: Lat 28.40817 Lon -80.67783 COG ----- SOG -----
5:02:49 PM: opencpn::MyApp exiting cleanly...

17:03:57:

________

17:03:57: 2013-12-17
17:03:57: ------- Starting OpenCPN -------
17:03:57: Version 3.2.2 Build 2013-05-08
17:03:57: wxWidgets version: wxWidgets 2.8.12
17:03:57: MemoryStatus: mem_total: 8075 mb, mem_initial: 8 mb
17:03:57: SData_Locn is C:\Program Files (x86)\OpenCPN\
17:03:57: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
17:03:57: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
17:03:57: No styles found at: C:\ProgramData\opencpn\
17:03:57: No styles found at: C:\ProgramData\opencpn\.opencpn\
17:03:58: Setting Viewpoint Lat/Lon 28.4094, -80.6767
17:03:58: Setting Ownship Lat/Lon 28.4082, -80.6778
17:03:58: System default Language: en_US
5:03:58 PM: Opencpn language set to: en_US
5:03:58 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
5:03:58 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
5:03:58 PM: Setting Viewpoint Lat/Lon 28.4094, -80.6767
5:03:58 PM: Setting Ownship Lat/Lon 28.4082, -80.6778
5:03:58 PM: Opening NMEA Datastream Serial:COM3
5:03:58 PM: Opening NMEA Datastream Serial:COM4
5:03:58 PM: Opening NMEA Datastream Serial:COM5
5:03:58 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
5:03:58 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:03:58 PM: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll Version detected: 108
5:03:58 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:03:58 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
5:03:58 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:03:58 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
5:03:58 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:03:58 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
5:03:58 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
5:03:58 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
5:03:58 PM: OpenGL-> Detected Intel renderer, disabling FBO
5:03:58 PM: OpenGL-> Framebuffer Objects unavailable
5:03:58 PM: OpenGL-> Using Depth buffer clipping
5:03:58 PM: OpenGL-> Estimated Max Resident Textures: 98
5:03:58 PM: ChartDB Cache policy: Application target is 1024 MBytes
5:03:58 PM: Loading chart db version: V017
5:03:58 PM: Chartdb: Chart directory list follows
5:03:58 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
5:03:58 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
5:03:58 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
5:03:59 PM: GPS Watchdog Timeout is: 6 sec.
5:03:59 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
5:03:59 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
5:03:59 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
5:03:59 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
5:03:59 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
5:03:59 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
5:04:02 PM: EnumerateSerialPorts() Found Garmin USB Driver.
5:04:02 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
5:04:02 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
5:04:02 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
5:04:02 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
5:04:03 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
5:04:15 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:04:19 PM: Closing NMEA Datastream Serial:COM3
5:04:19 PM: Closing NMEA Datastream Serial:COM4
5:04:19 PM: Stopping Secondary Thread
5:04:20 PM: Stopped in 1 sec.
5:04:20 PM: Closing NMEA Datastream Serial:COM5
5:04:20 PM: Stopping Secondary Thread
5:04:21 PM: Stopped in 1 sec.
5:04:21 PM: Opening NMEA Datastream Serial:COM3
5:04:21 PM: Opening NMEA Datastream Serial:COM4
5:04:21 PM: Opening NMEA Datastream Serial:COM5
5:04:22 PM: Closing NMEA Datastream Serial:COM3
5:04:22 PM: Closing NMEA Datastream Serial:COM4
5:04:22 PM: Stopping Secondary Thread
5:04:23 PM: Stopped in 1 sec.
5:04:23 PM: Closing NMEA Datastream Serial:COM5
5:04:23 PM: Stopping Secondary Thread
5:04:24 PM: Stopped in 1 sec.
5:04:24 PM: Opening NMEA Datastream Serial:COM3
5:04:24 PM: Opening NMEA Datastream Serial:COM4
5:04:24 PM: Opening NMEA Datastream Serial:COM5
5:04:58 PM: LOGBOOK: 2013-12-17 22:04:58 UTC GPS Lat 28.40732 Lon -80.67766 COG ----- SOG 0.00
5:05:05 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:05:06 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:05:06 PM: opencpn::MyFrame exiting cleanly.
5:05:06 PM: Closing NMEA Datastream Serial:COM3
5:05:06 PM: Closing NMEA Datastream Serial:COM4
5:05:06 PM: Stopping Secondary Thread
5:05:07 PM: Stopped in 1 sec.
5:05:07 PM: Closing NMEA Datastream Serial:COM5
5:05:07 PM: Stopping Secondary Thread
5:05:08 PM: Stopped in 1 sec.
5:05:08 PM: Chart cache purge
5:05:08 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:05:08 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:05:08 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:05:08 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:05:08 PM: Chart cache purge
5:05:08 PM: LOGBOOK: 2013-12-17 22:05:08 UTC OFF: Lat 28.40734 Lon -80.67766 COG ----- SOG 0.00
5:05:08 PM: opencpn::MyApp exiting cleanly...

17:05:11:

________

17:05:11: 2013-12-17
17:05:11: ------- Starting OpenCPN -------
17:05:11: Version 3.2.2 Build 2013-05-08
17:05:11: wxWidgets version: wxWidgets 2.8.12
17:05:11: MemoryStatus: mem_total: 8075 mb, mem_initial: 9 mb
17:05:11: SData_Locn is C:\Program Files (x86)\OpenCPN\
17:05:11: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
17:05:11: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
17:05:11: No styles found at: C:\ProgramData\opencpn\
17:05:11: No styles found at: C:\ProgramData\opencpn\.opencpn\
17:05:11: Setting Viewpoint Lat/Lon 28.4094, -80.6767
17:05:11: Setting Ownship Lat/Lon 28.4073, -80.6777
17:05:11: System default Language: en_US
5:05:11 PM: Opencpn language set to: en_US
5:05:11 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
5:05:11 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
5:05:11 PM: Setting Viewpoint Lat/Lon 28.4094, -80.6767
5:05:11 PM: Setting Ownship Lat/Lon 28.4073, -80.6777
5:05:11 PM: Opening NMEA Datastream Serial:COM3
5:05:11 PM: Opening NMEA Datastream Serial:COM4
5:05:11 PM: Opening NMEA Datastream Serial:COM5
5:05:11 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
5:05:11 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:05:11 PM: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll Version detected: 108
5:05:11 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
5:05:11 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
5:05:11 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
5:05:11 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
5:05:11 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
5:05:11 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
5:05:11 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
5:05:11 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
5:05:11 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
5:05:11 PM: OpenGL-> Detected Intel renderer, disabling FBO
5:05:11 PM: OpenGL-> Framebuffer Objects unavailable
5:05:11 PM: OpenGL-> Using Depth buffer clipping
5:05:11 PM: OpenGL-> Estimated Max Resident Textures: 98
5:05:11 PM: ChartDB Cache policy: Application target is 1024 MBytes
5:05:11 PM: Loading chart db version: V017
5:05:11 PM: Chartdb: Chart directory list follows
5:05:11 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
5:05:11 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
5:05:11 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
5:05:12 PM: GPS Watchdog Timeout is: 6 sec.
5:05:12 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
5:05:12 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
5:05:12 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
5:05:12 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
5:05:12 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
5:05:12 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
5:05:13 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
5:05:20 PM: EnumerateSerialPorts() Found Garmin USB Driver.
5:05:27 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
5:06:12 PM: LOGBOOK: 2013-12-17 22:06:12 UTC GPS Lat 28.40768 Lon -80.67778 COG ----- SOG 0.00
5:30:00 PM: LOGBOOK: 2013-12-17 22:30:00 UTC GPS Lat 28.40836 Lon -80.67812 COG ----- SOG 0.00
5:30:00 PM: Using bells sound file: C:\Program Files (x86)\OpenCPN\sounds\3bells.wav
6:00:00 PM: LOGBOOK: 2013-12-17 23:00:00 UTC GPS Lat 28.41687 Lon -80.71833 COG 233.80000 SOG 1.40
6:00:00 PM: Using bells sound file: C:\Program Files (x86)\OpenCPN\sounds\4bells.wav
6:09:48 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
6:09:50 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
6:09:50 PM: opencpn::MyFrame exiting cleanly.
6:09:50 PM: Closing NMEA Datastream Serial:COM3
6:09:50 PM: Closing NMEA Datastream Serial:COM4
6:09:50 PM: Stopping Secondary Thread
6:09:51 PM: Stopped in 1 sec.
6:09:51 PM: Closing NMEA Datastream Serial:COM5
6:09:51 PM: Stopping Secondary Thread
6:09:52 PM: Stopped in 1 sec.
6:09:52 PM: Chart cache purge
6:09:52 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom2gradar_pi.dll
6:09:52 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
6:09:52 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
6:09:52 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
6:09:52 PM: Chart cache purge
6:09:52 PM: LOGBOOK: 2013-12-17 23:09:52 UTC OFF: Lat 28.39789 Lon -80.69538 COG 199.70000 SOG 9.20
6:09:52 PM: opencpn::MyApp exiting cleanly...

19:10:24:

________

19:10:24: 2013-12-17
19:10:24: ------- Starting OpenCPN -------
19:10:24: Version 3.2.2 Build 2013-05-08
19:10:24: wxWidgets version: wxWidgets 2.8.12
19:10:24: MemoryStatus: mem_total: 8075 mb, mem_initial: 9 mb
19:10:24: SData_Locn is C:\Program Files (x86)\OpenCPN\
19:10:24: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
19:10:24: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
19:10:24: No styles found at: C:\ProgramData\opencpn\
19:10:24: No styles found at: C:\ProgramData\opencpn\.opencpn\
19:10:24: Setting Viewpoint Lat/Lon 28.4094, -80.6767
19:10:24: Setting Ownship Lat/Lon 28.3979, -80.6954
19:10:24: System default Language: en_US
7:10:24 PM: Opencpn language set to: en_US
7:10:24 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
7:10:24 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
7:10:24 PM: Setting Viewpoint Lat/Lon 28.4094, -80.6767
7:10:24 PM: Setting Ownship Lat/Lon 28.3979, -80.6954
7:10:24 PM: Opening NMEA Datastream Serial:COM3
7:10:24 PM: Opening NMEA Datastream Serial:COM4
7:10:24 PM: Opening NMEA Datastream Serial:COM5
7:10:24 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
7:10:24 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:10:24 PM: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll Version detected: 108
7:10:24 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:10:24 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
7:10:24 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:10:24 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
7:10:24 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:10:24 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
7:10:24 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
7:10:24 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
7:10:24 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
7:10:24 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
7:10:24 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
7:10:24 PM: OpenGL-> Detected Intel renderer, disabling FBO
7:10:24 PM: OpenGL-> Framebuffer Objects unavailable
7:10:24 PM: OpenGL-> Using Depth buffer clipping
7:10:24 PM: OpenGL-> Estimated Max Resident Textures: 98
7:10:24 PM: ChartDB Cache policy: Application target is 1024 MBytes
7:10:24 PM: Loading chart db version: V017
7:10:24 PM: Chartdb: Chart directory list follows
7:10:24 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
7:10:24 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
7:10:24 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
7:10:25 PM: GPS Watchdog Timeout is: 6 sec.
7:10:25 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL82M\US5FL82M.000
7:10:25 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3FL30M\US3FL30M.000
7:10:25 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US2GC12M\US2GC12M.000
7:10:25 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US1GC09M\US1GC09M.000
7:10:25 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
7:10:25 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
7:10:28 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
7:10:28 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
7:10:29 PM: EnumerateSerialPorts() Found Garmin USB Driver.
7:10:32 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
7:10:32 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
7:10:32 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
7:10:42 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:11:12 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US5FL83M\US5FL83M.000
7:11:25 PM: LOGBOOK: 2013-12-18 00:11:25 UTC GPS Lat 28.40817 Lon -80.67800 COG 115.40000 SOG 68.90
7:21:10 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US3GA10M\US3GA10M.000
7:22:27 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\NOAA Electronic Navigational Charts (Vector S-57 format)\ENC_ROOT\US4FL80M\US4FL80M.000
7:22:40 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:22:44 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:22:44 PM: opencpn::MyFrame exiting cleanly.
7:22:44 PM: Closing NMEA Datastream Serial:COM3
7:22:44 PM: Closing NMEA Datastream Serial:COM4
7:22:44 PM: Stopping Secondary Thread
7:22:45 PM: Stopped in 1 sec.
7:22:45 PM: Closing NMEA Datastream Serial:COM5
7:22:45 PM: Stopping Secondary Thread
7:22:46 PM: Stopped in 1 sec.
7:22:46 PM: Chart cache purge
7:22:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:22:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:22:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:22:46 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:22:46 PM: Chart cache purge
7:22:46 PM: LOGBOOK: 2013-12-18 00:22:46 UTC OFF: Lat 28.63971 Lon -80.12323 COG 193.00000 SOG 13.20
7:22:46 PM: opencpn::MyApp exiting cleanly...

19:22:51:

________

19:22:51: 2013-12-17
19:22:51: ------- Starting OpenCPN -------
19:22:51: Version 3.2.2 Build 2013-05-08
19:22:51: wxWidgets version: wxWidgets 2.8.12
19:22:51: MemoryStatus: mem_total: 8075 mb, mem_initial: 9 mb
19:22:51: SData_Locn is C:\Program Files (x86)\OpenCPN\
19:22:51: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
19:22:51: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
19:22:51: No styles found at: C:\ProgramData\opencpn\
19:22:51: No styles found at: C:\ProgramData\opencpn\.opencpn\
19:22:51: Setting Viewpoint Lat/Lon 28.5473, -80.5385
19:22:51: Setting Ownship Lat/Lon 28.6397, -80.1232
19:22:51: System default Language: en_US
7:22:51 PM: Opencpn language set to: en_US
7:22:51 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
7:22:51 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
7:22:51 PM: Setting Viewpoint Lat/Lon 28.5473, -80.5385
7:22:51 PM: Setting Ownship Lat/Lon 28.6397, -80.1232
7:22:51 PM: Opening NMEA Datastream Serial:COM3
7:22:51 PM: Opening NMEA Datastream Serial:COM4
7:22:51 PM: Opening NMEA Datastream Serial:COM5
7:22:51 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
7:22:51 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:22:51 PM: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll Version detected: 108
7:22:51 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:22:51 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
7:22:52 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:22:52 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
7:22:52 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:22:52 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
7:22:52 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
7:22:52 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
7:22:52 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
7:22:52 PM: OpenGL-> Detected Intel renderer, disabling FBO
7:22:52 PM: OpenGL-> Framebuffer Objects unavailable
7:22:52 PM: OpenGL-> Using Depth buffer clipping
7:22:52 PM: OpenGL-> Estimated Max Resident Textures: 98
7:22:52 PM: ChartDB Cache policy: Application target is 1024 MBytes
7:22:52 PM: Loading chart db version: V017
7:22:52 PM: Chartdb: Chart directory list follows
7:22:52 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
7:22:52 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
7:22:52 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
7:22:52 PM: GPS Watchdog Timeout is: 6 sec.
7:22:52 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11460.geo
7:22:52 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11009.geo
7:22:52 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\108.geo
7:22:52 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
7:22:52 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
7:22:54 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
7:22:55 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
7:22:59 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
7:22:59 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
7:22:59 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
7:23:07 PM: EnumerateSerialPorts() Found Garmin USB Driver.
7:23:32 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:23:35 PM: Closing NMEA Datastream Serial:COM3
7:23:35 PM: Closing NMEA Datastream Serial:COM4
7:23:35 PM: Stopping Secondary Thread
7:23:36 PM: Stopped in 1 sec.
7:23:36 PM: Closing NMEA Datastream Serial:COM5
7:23:36 PM: Stopping Secondary Thread
7:23:37 PM: Stopped in 1 sec.
7:23:37 PM: Opening NMEA Datastream Serial:COM3
7:23:37 PM: Opening NMEA Datastream Serial:COM4
7:23:37 PM: Opening NMEA Datastream Serial:COM5
7:23:40 PM: Closing NMEA Datastream Serial:COM3
7:23:40 PM: Closing NMEA Datastream Serial:COM4
7:23:40 PM: Stopping Secondary Thread
7:23:41 PM: Stopped in 1 sec.
7:23:41 PM: Closing NMEA Datastream Serial:COM5
7:23:41 PM: Stopping Secondary Thread
7:23:42 PM: Stopped in 1 sec.
7:23:42 PM: Opening NMEA Datastream Serial:COM3
7:23:42 PM: Opening NMEA Datastream Serial:COM4
7:23:42 PM: Opening NMEA Datastream Serial:COM5
7:23:52 PM: LOGBOOK: 2013-12-18 00:23:52 UTC GPS Lat 28.40817 Lon -80.67800 COG 193.00000 SOG 13.20
7:24:25 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:24:28 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:24:28 PM: opencpn::MyFrame exiting cleanly.
7:24:28 PM: Closing NMEA Datastream Serial:COM3
7:24:28 PM: Closing NMEA Datastream Serial:COM4
7:24:28 PM: Stopping Secondary Thread
7:24:29 PM: Stopped in 1 sec.
7:24:29 PM: Closing NMEA Datastream Serial:COM5
7:24:29 PM: Stopping Secondary Thread
7:24:30 PM: Stopped in 1 sec.
7:24:30 PM: Chart cache purge
7:24:30 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:24:30 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:24:30 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:24:30 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:24:30 PM: Chart cache purge
7:24:30 PM: LOGBOOK: 2013-12-18 00:24:30 UTC OFF: Lat 28.63971 Lon -80.12323 COG 193.00000 SOG 13.20
7:24:30 PM: opencpn::MyApp exiting cleanly...

19:24:43:

________

19:24:43: 2013-12-17
19:24:43: ------- Starting OpenCPN -------
19:24:43: Version 3.2.2 Build 2013-05-08
19:24:43: wxWidgets version: wxWidgets 2.8.12
19:24:43: MemoryStatus: mem_total: 8075 mb, mem_initial: 8 mb
19:24:43: SData_Locn is C:\Program Files (x86)\OpenCPN\
19:24:43: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
19:24:43: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
19:24:43: No styles found at: C:\ProgramData\opencpn\
19:24:43: No styles found at: C:\ProgramData\opencpn\.opencpn\
19:24:43: Setting Viewpoint Lat/Lon 28.5473, -80.5385
19:24:43: Setting Ownship Lat/Lon 28.6397, -80.1232
19:24:43: System default Language: en_US
7:24:43 PM: Opencpn language set to: en_US
7:24:43 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
7:24:44 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
7:24:44 PM: Setting Viewpoint Lat/Lon 28.5473, -80.5385
7:24:44 PM: Setting Ownship Lat/Lon 28.6397, -80.1232
7:24:44 PM: Opening NMEA Datastream Serial:COM3
7:24:44 PM: Opening NMEA Datastream Serial:COM4
7:24:44 PM: Opening NMEA Datastream Serial:COM5
7:24:44 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
7:24:44 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:24:44 PM: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll Version detected: 108
7:24:44 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:24:44 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
7:24:44 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:24:44 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
7:24:44 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:24:44 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
7:24:44 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
7:24:44 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
7:24:44 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
7:24:44 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
7:24:44 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
7:24:44 PM: OpenGL-> Detected Intel renderer, disabling FBO
7:24:44 PM: OpenGL-> Framebuffer Objects unavailable
7:24:44 PM: OpenGL-> Using Depth buffer clipping
7:24:44 PM: OpenGL-> Estimated Max Resident Textures: 98
7:24:44 PM: ChartDB Cache policy: Application target is 1024 MBytes
7:24:44 PM: Loading chart db version: V017
7:24:44 PM: Chartdb: Chart directory list follows
7:24:44 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
7:24:44 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
7:24:44 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
7:24:44 PM: GPS Watchdog Timeout is: 6 sec.
7:24:44 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11460.geo
7:24:44 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11009.geo
7:24:44 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\108.geo
7:24:44 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
7:24:44 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
7:24:44 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
7:24:44 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
7:24:45 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
7:24:46 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
7:24:49 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
7:24:49 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
7:24:49 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
7:24:54 PM: EnumerateSerialPorts() Found Garmin USB Driver.
7:25:06 PM: PlugInManager: Initializing PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:25:44 PM: LOGBOOK: 2013-12-18 00:25:44 UTC GPS Lat 28.63971 Lon -80.12323 COG 137.50000 SOG 0.00
7:25:51 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11476.geo
7:28:07 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:28:07 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:28:08 PM: opencpn::MyFrame exiting cleanly.
7:28:08 PM: Closing NMEA Datastream Serial:COM3
7:28:08 PM: Closing NMEA Datastream Serial:COM4
7:28:08 PM: Stopping Secondary Thread
7:28:09 PM: Stopped in 1 sec.
7:28:09 PM: Closing NMEA Datastream Serial:COM5
7:28:09 PM: Stopping Secondary Thread
7:28:10 PM: Stopped in 1 sec.
7:28:10 PM: Chart cache purge
7:28:10 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:28:10 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:28:10 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:28:10 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:28:10 PM: Chart cache purge
7:28:10 PM: LOGBOOK: 2013-12-18 00:28:10 UTC OFF: Lat 28.63971 Lon -80.12323 COG 193.00000 SOG 13.20
7:28:10 PM: opencpn::MyApp exiting cleanly...

19:50:40:

________

19:50:40: 2013-12-17
19:50:40: ------- Starting OpenCPN -------
19:50:40: Version 3.2.2 Build 2013-05-08
19:50:40: wxWidgets version: wxWidgets 2.8.12
19:50:40: MemoryStatus: mem_total: 8075 mb, mem_initial: 9 mb
19:50:40: SData_Locn is C:\Program Files (x86)\OpenCPN\
19:50:40: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
19:50:40: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
19:50:40: No styles found at: C:\ProgramData\opencpn\
19:50:40: No styles found at: C:\ProgramData\opencpn\.opencpn\
19:50:40: Setting Viewpoint Lat/Lon 28.4082, -80.678
19:50:40: Setting Ownship Lat/Lon 28.6397, -80.1232
19:50:40: System default Language: en_US
7:50:40 PM: Opencpn language set to: en_US
7:50:40 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
7:50:40 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
7:50:40 PM: Setting Viewpoint Lat/Lon 28.4082, -80.678
7:50:40 PM: Setting Ownship Lat/Lon 28.6397, -80.1232
7:50:40 PM: Opening NMEA Datastream Serial:COM3
7:50:40 PM: Opening NMEA Datastream Serial:COM4
7:50:40 PM: Opening NMEA Datastream Serial:COM5
7:50:41 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
7:50:41 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:50:41 PM: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll Version detected: 108
7:50:41 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:50:41 PM: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll Version detected: 106
7:50:41 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:50:41 PM: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll Version detected: 108
7:50:41 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:50:41 PM: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll Version detected: 107
7:50:41 PM: Changing NMEA Datasource for IIBWC to Serial:COM4 (Priority: 0)
7:50:41 PM: Changing NMEA Datasource for IIDBT to Serial:COM4 (Priority: 0)
7:50:41 PM: OpenGL-> Renderer String: Intel(R) HD Graphics 3000
7:50:41 PM: OpenGL-> Detected Intel renderer, disabling stencil buffer
7:50:41 PM: OpenGL-> Detected Intel renderer, disabling FBO
7:50:41 PM: OpenGL-> Framebuffer Objects unavailable
7:50:41 PM: OpenGL-> Using Depth buffer clipping
7:50:41 PM: OpenGL-> Estimated Max Resident Textures: 98
7:50:41 PM: ChartDB Cache policy: Application target is 1024 MBytes
7:50:41 PM: Loading chart db version: V017
7:50:41 PM: Chartdb: Chart directory list follows
7:50:41 PM: Chart directory #0: C:\Users\Cindy\Documents\Charts
7:50:41 PM: Chart directory #1: C:\Users\Cindy\Documents\Charts\Bahamas Chartpak 7
7:50:41 PM: Chart directory #2: C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)
7:50:42 PM: GPS Watchdog Timeout is: 6 sec.
7:50:42 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11460.geo
7:50:42 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11476.geo
7:50:42 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\11009.geo
7:50:42 PM: Initializing Chart C:\Users\Cindy\Documents\Charts\Key Largo to Canaveral w-Abacos (Raster)\SOFTCHT\108.geo
7:50:42 PM: Changing NMEA Datasource for IIGLL to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIHDG to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIHDM to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIHDT to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for AIVDO to Serial:COM5 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIRSA to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIMWV to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIVHW to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIVPW to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIVWR to Serial:COM4 (Priority: 0)
7:50:42 PM: Changing NMEA Datasource for IIVWT to Serial:COM4 (Priority: 0)
7:50:43 PM: Changing NMEA Datasource for IIMTW to Serial:COM4 (Priority: 0)
7:50:43 PM: Changing NMEA Datasource for IIZDA to Serial:COM4 (Priority: 0)
7:50:43 PM: Changing NMEA Datasource for IIHVM to Serial:COM4 (Priority: 0)
7:50:43 PM: Changing NMEA Datasource for IIMWD to Serial:COM4 (Priority: 0)
7:50:43 PM: Changing NMEA Datasource for IIVTG to Serial:COM4 (Priority: 0)
7:51:41 PM: LOGBOOK: 2013-12-18 00:51:41 UTC GPS Lat 28.40814 Lon -80.67805 COG ----- SOG 0.00
7:55:00 PM: PlugInManager: Deactivating PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:55:00 PM: opencpn::MyFrame exiting cleanly.
7:55:00 PM: Closing NMEA Datastream Serial:COM3
7:55:00 PM: Closing NMEA Datastream Serial:COM4
7:55:00 PM: Stopping Secondary Thread
7:55:01 PM: Stopped in 1 sec.
7:55:01 PM: Closing NMEA Datastream Serial:COM5
7:55:01 PM: Stopping Secondary Thread
7:55:02 PM: Stopped in 1 sec.
7:55:02 PM: Chart cache purge
7:55:02 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:55:02 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/dashboard_pi.dll
7:55:02 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
7:55:02 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/grib_pi.dll
7:55:02 PM: Chart cache purge
7:55:02 PM: LOGBOOK: 2013-12-18 00:55:02 UTC OFF: Lat 28.40837 Lon -80.67869 COG 223.00000 SOG 5.60
7:55:02 PM: opencpn::MyApp exiting cleanly...

19:56:06:

________

19:56:06: 2013-12-17
19:56:06: ------- Starting OpenCPN -------
19:56:06: Version 3.2.2 Build 2013-05-08
19:56:06: wxWidgets version: wxWidgets 2.8.12
19:56:06: MemoryStatus: mem_total: 8075 mb, mem_initial: 10 mb
19:56:06: SData_Locn is C:\Program Files (x86)\OpenCPN\
19:56:06: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
19:56:06: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
19:56:06: No styles found at: C:\ProgramData\opencpn\
19:56:06: No styles found at: C:\ProgramData\opencpn\.opencpn\
19:56:06: Setting Viewpoint Lat/Lon 28.4082, -80.678
19:56:06: Setting Ownship Lat/Lon 28.4084, -80.6787
19:56:06: System default Language: en_US
7:56:06 PM: Opencpn language set to: en_US
7:56:06 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
7:56:06 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
7:56:06 PM: Setting Viewpoint Lat/Lon 28.4082, -80.678
7:56:06 PM: Setting Ownship Lat/Lon 28.4084, -80.6787
7:56:06 PM: Opening NMEA Datastream Serial:COM3
7:56:06 PM: Opening NMEA Datastream Serial:COM4
7:56:06 PM: Opening NMEA Datastream Serial:COM5
7:56:06 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
7:56:06 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll
7:56:06 PM: C:\Program Files (x86)\OpenCPN\plugins/custom3gradar_pi.dll Version detected: 108
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 17:27   #363
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 7,463
Re: OpenCPN Radar Overlay PlugIn
Matt....

Lets get rid (temporarily) of your Wifi? network interface 10.50.10.123/24. and try again, with and without wireshark running in background.

And, just so I am clear, do you have the scanner plugged directly into your PC, or is it thru a router/hub/switch?

Maybe I can log into your machine using Remote Desktop, if all else fails...

Dave
bdbcat is offline   Reply With Quote
Old 17-12-2013, 17:40   #364
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
Will do.
Scanner is plugged into the Amp adapter with on/off switch, then a two foot direct LAN cable directly into the PC.
You can certainly log on with Remote Desktop if need be.
Give me a few moments and I'll send the wireshark files.
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 17:47   #365
Registered User

Join Date: Apr 2009
Location: Marina Del Rey
Boat: Hylas 44
Posts: 387
Re: OpenCPN Radar Overlay PlugIn
Matt

There are 2 gradar plugins loaded: custom3gradar_pi.dll and gradar_win32_pi18_v13_pi.dll.
ChuckSK is offline   Reply With Quote
Old 17-12-2013, 18:09   #366
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
This is the first set of files with wireless adapter disabled:
Wireshark running.
pi_log
wireshark filewireshark without wireless adaper.pcapng.pdf

pi_log without wireless adapter and with wireshark running.rtf.pdf

Log file without wireless adapter with wireshark.rtf.pdf
OpenCPN log file
More coming without wireshark running
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 18:23   #367
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
two files:
pi_log
log file
without wireless adapter
without wireshark runningpi_log no wireshark no wireless adapter.rtf.pdf

log file no wireshark no wireless adapter.rtf.pdf
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 18:27   #368
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
Chuck,
Just saw your note. Thanks for looking.
Both of those .dlls are in the plug in folder.
Only one is enabled, unless the other is enabling by itself.
I do notice that right now I have to enable the plugin every time I open OCPN. Not an issue to us now until we get the radar working.
Matt
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 18:38   #369
Registered User

Join Date: Apr 2009
Location: Marina Del Rey
Boat: Hylas 44
Posts: 387
Re: OpenCPN Radar Overlay PlugIn
Matt

Delete gradar_win32_pi18_v13_pi.dll from the plugin folder.
ChuckSK is offline   Reply With Quote
Old 17-12-2013, 18:41   #370
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
OK Chuck, I'm slow, but I did it. I put a .pdf extension on the 1.3 file. Doesn't show on the plugin list.
Now at least when I fire up OCPN and enable gradar, it stays enabled.
Same results on the pi_log though.
Do you want me to go through the wireshark/wireless adapter exercise again? Or did you get enough data?
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 18:50   #371
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 7,463
Re: OpenCPN Radar Overlay PlugIn
Matt...

In the log file, you are still loading two different gradar.dll
a. Custom3, and
b. V1.3

Please move/delete/rename
Code:
C:\Program Files (x86)\OpenCPN\plugins/gradar_win32_pi18_v13_pi.dll
Dave
bdbcat is offline   Reply With Quote
Old 17-12-2013, 18:52   #372
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
Log file with gradar 14.rtf.pdfOK, I put so much stuff on the forum that I missed Dave's request for a log file after I moved the gradar 1.3
Log file attached
Thanks,
Matt
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 19:17   #373
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 7,463
Re: OpenCPN Radar Overlay PlugIn
Matt...

OK, no new news from the latest logs, etc.

Think wiring for a sec...

I think that you may need a CAT5 crossover cable from the amp connector directly into a PC. . I think a Garmin display is wired as a hub, which means that the scanner is wired as a PC. So you need a crossover to connect the scanner to the PC. Or not...

I use a straight cable into a network switch, works fine

However, how can wireshark work on you system if the cable is wrong? Another variable: Some modern network hardware is smart enough (Auto Radix) to make the crossover electronically if necessary.

Anyone know more than me about this wiring stuff?

Dave
bdbcat is offline   Reply With Quote
Old 17-12-2013, 19:18   #374
Registered User

Join Date: Jul 2010
Location: East Coast US, Caribbean
Boat: Moody 425 sloop
Posts: 128
Re: OpenCPN Radar Overlay PlugIn
Quick question:
The network adapter indicates "unidentified network"
Should Win7 identify the radar, or is this OK?
Helmsmatt is offline   Reply With Quote
Old 17-12-2013, 19:21   #375
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 7,463
Re: OpenCPN Radar Overlay PlugIn
Matt...

Lets try to set you up for Remote Desktop Access.

Configure Remote Desktop Access on Windows 7 Systems

Dave
bdbcat is offline   Reply With Quote
Reply
Page 25 of 61 « First 152324 25 262735 Last »

Tags
opencpn, paracelle, radar

« Transferring OpenCPN Routes to New Laptop | Lost SOG and COG - Android OpenCPN 5.6.2 »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenCpn for Navigation gpshephe Marine Electronics 10 30-12-2013 09:33
What Do You Think of Selling OpenCPN? esan6 OpenCPN 25 23-10-2013 08:35
Help with OpenCPN Sailorman375 Navigation 3 11-08-2013 20:58
For Sale: Radar Mount sailorman14 Classifieds Archive 5 23-04-2012 20:50
OpenCPN Version 2.6 Beta Build 1524 bdbcat OpenCPN 115 09-04-2012 11:10

Advertise Here


All times are GMT -7. The time now is 12:49.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.