read and use signalK data

[Bronno Mulder]

Originally Posted by Hakan

Bronno..
Protocol:
NMEA0183 and Signal K data are two different data formats. SignalK data can't be seen in "NMEA Debug window"

If you want NMEA0183 from SignalK(SK) you have to use protocol TCP and port 10110.
If you want SignalK data from SK you have to use protocol Signal K and port 3000. (Please disable "Automatic server discovery" once used.)

The connection between OCPN and SK works fine if the tablet and Raspberry are both connected to the same IP network segment. (Like e.g. 192.168.1.xxx)

Thanks! With TCP and 10110 was the first time I saw the connection by debugging. When I went back to SignalK and port 3000, the GPS signal was still not received. After different times with Automatic Server Discovery, Discover now I saw for the first time that a GPS connection was coming in OpenCPN by SignalK It iseems to be stable now, but I still don't understand why it didn't work before. I'm happy that it is working now. Thanks for your advice.