General Info: Orana Head skinfitting outlet type

[oranaman]

Hi guys,
As my boat is 1800 miles away please can any other Orana owner confirm the type of skin fitting used for the head outlet 11/2 inch or 38mm as shown in the pics. Its either an elbow (90 degree) or straight fitting. Is the skin fitting outlet a 11/2 BSP screw thread (if so male?) connected into an isolation valve? or is it a 11/2 hose fitting into a loop above the waterline.

I presume to access, remove the basin cupboard - grovel around!!. Anybody replaced the skin fittings.

[Cotemar]

Maybe these posts will help.
Look before and after this post to get more info.

http://www.cruisersforum.com/forums/...tml#post987486

http://www.cruisersforum.com/forums/...tml#post983340

[DtM]

It has an elbow.

You are correct that the way to get to it is through the basin cupboard.

You can remove the whole cupboard rather than just use the small hole that is already there. We replaced some skin fittings as part of a much larger job of removing/relocating the head/shower into the forward cabin on our Orana.