Want To Buy: Any make of headsail furling system

[Jolly Roger]

I’m still looking for a headsail furling system with at least a 38’ luff.
I’m having difficulty finding one of these babies. One problem, on those which are still in one length, has been the difficulty separating the foil extrusions for shipping.
Anyway, I’ll look at all possibilities and cash is waiting.

[Seighlor]

JR,

It may be overkill for your boat but I can offer you a ProFurl P52 furling system that I replaced with a new Furlex furler. The ProFurl is old but still worked well when removed from my boat. The luff extrusions are in approximately five-foot lengths so shipping should not be a problem.

This was purchased new in 1986 and used on a 44-foot boat. Some of the small hex screws that lock the extrusions in place may need to be replaced and the threaded holes in the extrusions may need to be tapped to clean the threads. Otherwise, I foresee no problems in putting it all together.

Offered for $500 plus shipping or can be picked up in Daytona Beach, Florida.