For Sale: Boat goodies for sale

[Jolly Roger]

I have the following items surplus to my rebuild.

Sail with sliders: 28’ luff, 10’7” foot, 30’3” leech with approx 12” roach. Four batten pockets. 8oz Dacron in clean condition. $125

18” diameter stainless steel sink. $30

One 40’0” length of 5/16” 1x19 stainless rigging wire with 1/2” eye and 1/2” turnbuckle. Excellent condition. $50

One 39’ 3½” long 1x19 stainless rigging wire with two 5/8” eyes. $40

Four 26’0” lengths of 5/16 1x19 rigging wire with 5/8” stud and 5/8” eye. $30 each

Stainless destroyer type wheel, 28” diameter, with 1” straight shaft, 1/4” keyway. (Defender’s price $482.00). $100

Two flexible PVC Dorade cowls and mounting rings, 3” diameter, Including brass mounting ring. $20 each

Outboard prop 12½” diam x 6 5/8” pitch. 3/4” straight spline. $30

Four through-hull deck drain pipes to outside of hull, Bronze fittings 1½” pipes. Cockpit drainage if you don’t like below waterline drains $40 each

4” diam cowl deck flange for a screw in cowl, with cover plate. Bronze $20

Four beautiful chrome rigging tangs. Right hand thread (top of turnbuckle), 5/8” thread and clevis hole. $40 each

Extended chrome rigging tang. 7” long with 3” x 5/8” right hand thread. 5/8” clevis. $40

Three bronze rigging tangs, 4” long x 5/8” right hand thread, 5/8” clevis,
$20 each

Two winch pads, 6” diameter, Aluminum, can be welded or bolted to a mast. $20 each

All items located in Orlando or Titusville, Florida.
E-mail through my website Items for sale to see pictures of everything. __________________

[Bluemansailor]

Hi -
what do you want for the Wrap stop. 9/32” bore but can be drilled for a bigger wire diameter.

thanks

[Jolly Roger]

Originally Posted by Bluemansailor

Hi -
what do you want for the Wrap stop. 9/32” bore but can be drilled for a bigger wire diameter.

thanks

They retail for around $60.00, so how about $15.00 plus freight?

[Bluemansailor]

Sounds good, I'll PM you

[antoha]

hello,
are the winch pads angled? (do you have photos?)
thank you!
anton

[Jolly Roger]

Originally Posted by antoha

hello,
are the winch pads angled? (do you have photos?)
thank you!
anton

Here is a picture of the pads from my website.
You will see they have a raised lip on one side. If you want to angle them more, maybe a wooden winch pad would do it.