Cruisers Forum
 


 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 22-07-2013, 00:58   #1
Registered User

Join Date: Jul 2013
Posts: 11
CLASSIC YACHT PARTS - BRONZE

Hi,

I have recently completed a 7 year restoration project in Australia and have many parts, many custom made left over where we changed our mind. www.hurrica-v.com The project was money-no-object, (but now I wish I did not take that view), and all parts are the best available. The yacht is also on the market!



The following is a list and photos are available.

SHIPS WHEEL - US$1250 Location Australia
Brand new Brazilian mahogany wheel is in parts, 42 inches tip to tip, includes drilled polish brass hoops.
The wheel is ready to glue for fitting to your own hub. This is the real thing built for my classic yacht restoration of Hurrica-v,
but after commissioning, I found a 1920s original.
Will freight at your cost via Pack-n-send. Details steve.gunns1@gmail.com

SAIL HANKS - US$75 Location Australia
New bronze but lightly tarnished. (49) Suits up to ½ inch wire.
Will freight at your cost via Pack-n-send. Details steve.gunns1@gmail.com

ROPE JAMMERS – US$195 Location Australia
Used AB2 bronze jammers to suit 10mm rope. Winch handle opens/shuts.
Will freight at your cost via Pack-n-send. Details steve.gunns1@gmail.com

RIGGING SCREWS + SWAGE EYES – US$800 Location Australia
Brand new bronze screws Stalok NB31-12 with ½ inch pin (7) and
mating s/steel swage eyes 039-08-13 for 5/16 inch wire (7).
Will freight at your cost via Pack-n-send.

SAIL SLIDES US$125 Location Australia
Bronze used to suit 1 inch track, mostly new but tarnished. (86)
Will freight at your cost via Pack-n-send.

EYE BOLTS US$90 Location Australia
Bronze AB2 high strength eye bolts (3) onto a raised base, with 8 inch long bronze studs. Suits up to ½ inch rope or block.
Will freight at your cost via Pack-n-send.

JONBUOY RECOVERY MODULE US$400 Location Australia
Man over board inflatable safety recovery system that fits to the rear pulpit. New never fitted
Will freight at your cost via Pack-n-send.

JONBUOY INFLATIBLE DAN BUOY US$150 Location Australia
Safety dan buoy inflates at the pull of a pullcord. New never fitted.
Will freight at your cost via Pack-n-send.

BUTTERFLY HATCH CATCHES US$120 Location Australia
Chrome catches with lower part screw to frame and screw ring fits to hatch. (8)
Davey - new but one tarnished.
Will freight at your cost via Pack-n-send.

BRONZE FRAME TIMBER BLOCKS US$400 Location Australia
Bronze AB2 high strength frame with ash facings. (2) 90 degree eye. Structurally perfect. Needs new varnish.
Sheave Dia 3 inch.Only fitted a short time and near new.
Custom built for 12 ton breaking load. Suits ½ inch rope.
Will freight at your cost via Pack-n-send.

BRONZE FRAME TIMBER BLOCKS US$450 Location Australia
Bronze AB2 high strength frame with ash facings. (2) 90 degree eye. Structurally perfect. Sheave Dia 4 inch.
Only fitted a short time and near new. Custom built for 12 ton breaking load. Suits 5/8 inch rope. Will freight at your cost via Pack-n-send.

BRONZE PADEYES US$225 Location Australia
Bronze AB2 high strength with eye suits ¾ inch rope. (2) Has 4 x countersunk mount bolts to suit 3/8 inch bolts. Brand new.
Will freight at your cost via Pack-n-send.

BRONZE CHEEK BLOCKS US$265 Location Australia
Double Fully bronze AB2 high strength with twin sheaves 1.75 and 1.25 inches to suit 3/8 inch rope. (2)
Has 6 mounting bolts to suit ¼ inch bolts. Suits side of boom reefing. Brand new.
Will freight at your cost via Pack-n-send.

BRONZE CHEEK BLOCKS US$385 Location Australia
Double fully bronze AB2 high strength blocks (2) with twin sheaves 1.75 and 1.25 inches to suit 3/8 inch rope, plus beckett.
Each block is fitted with ¾ inch track 2.5 feet long. Track mounts with normal c/s screws. Suits side of boom reefing. Brand new.
Will freight at your cost via Pack-n-send.
steveg is offline  
Old 22-07-2013, 02:03   #2
Registered User

Join Date: Aug 2007
Posts: 1,076
Re: CLASSIC YACHT PARTS - BRONZE

She is gorgeous!!! Too bad I just sold my classic wooden Yawl a few months back, otherwise, I would get the lot!! Wasn't this yacht used in the movie, The Great Gatsby?? Cheers
shadow is offline  
Old 23-07-2013, 00:14   #3
Registered User

Join Date: Jul 2013
Posts: 11
Re: CLASSIC YACHT PARTS - BRONZE

Yes Hurrica-v is the Gatsby yacht. We only ended getting about 10 seconds on screen after 2 hours of helicopter shoot, plus camera on board.
steveg is offline  
Old 23-07-2013, 00:30   #4
Moderator
 
Seaworthy Lass's Avatar

Cruisers Forum Supporter

Join Date: Oct 2008
Boat: Bestevaer 49
Posts: 16,247
Re: CLASSIC YACHT PARTS - BRONZE

Oh, that boat is enough to make me swoon
She is just gorgeous!

Good luck selling her.
__________________
SWL (enthusiastic amateur)
"To me the simple act of tying a knot is an adventure in unlimited space." Clifford Ashley
"The cure for anything is salt water: sweat, tears or the sea." Isak Dinesen

Unveiling Bullseye strops for low friction rings
Seaworthy Lass is offline  
 

Tags
parts, yacht


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 03:05.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.