For Sale: Yacht Gear (in Australia)

[ribbony]

Here is the current list:

Stainless frame that sits near the mast for crew to brace upon while working winches, etc.

Dual lever morse engine controls.

PROPELLER SHAFT 1.5” STAINLESS STEEL – WITH GLAND AND STERNTUBE in Very good condition. The shaft is about 2.2mt long x 1.5” dia. There is a SS stern tube, packing gland, bellows and a crown SS nut for the prop end. The shaft is tapered with a keyway at both ends (no propeller included).


Deck winches -
2x Seafast alloy with built in handles,
2x Fico bronze foot operated,
1x Barlow 20 single speed,
2x Barlow 15’s single speed(small and very very large),
1x Francis 2speed very large winch for a big yacht. None are self tailing !

Anchor winch, SL510 in exc mechanical condition (manual single speed).

Portlights/windows (NEW) for power or sail vessels, strong enough for use on topsides (non opening) - alloy framed with 12mm lenses.

Brass/Bronze Air Vents 5" openings, (old and heavy).

Yamaha 22HP diesel in need of lots of TLC.

Mariner 8hp long shaft outboard, fresh water use, easy starting, run well.

Bronze fixed round portlight, large.

OMC forward controll lever with tilt/fwd/rev/speed/etc.


Inflatable boat, High Sierra, 2.7mt with removable transom, does not have a rigid floor so it packs up small for storage in hold or boot. Excellent condition.

Wire halyard winch - medium size.


Antique wooden RFD raft pump, bellows type, came out of a very old life raft, nicely made.

Life Raft - 6 person RFD, way out of test, has the fiberglass pod.

How to cruise DVD’s, set of 2 by L & L Pardey - very informative, the best we have seen so far.

Send us an email or call 0403782631, most of the gear is located in Sydney a couple of items are in the Snowy Mts.

[martinridge]

need a couple of sheet winches for a 38' tri.......bigger is usually better, anything to suit....cheers

[martinridge]

oh....just remembered...can email me ....martinridge@live.com

[straycurrent]

does your bird sail ? we have a cockateil as part of our crew as well!!!

[ianhef]

Windvane steering RVG - aux rudder type with trim tab, suit medium or heavy displacement vessel.

Hi, I'm looking for some sort of windvane steering system for a fairly heavy steel Ebbtide 36. Any pictures or info on this one you have for sale?

[ribbony]

Sorry the windvane system was sold.

As I do not visit the forums much in our Oz winter, it is best to PM me if you have a question as it could be ages before I log in again.

[ribbony]

Our Cockatiel has not been on the boat yet, it is rather michevious and there is too many cables to eat through and cane covered cupboard doors to decane. It like using it's beak for anything destructive !