For Sale: Garmin GHP12 Autopilot NEW

[sailnow2011]

New, never installed autopilot. All you need to add is a drive unit that fits your boat.
The GHP12 was designed with sailboats in mind, and is loaded with sailboat features.
Typically about $2200 new, I will sell mind for $1400 shipped to USA.
Located in FL
Panbo: The Marine Electronics Hub: Garmin GHP 12 autopilot, hello sailors!

[Lostkozz22]

Where if florida are you?
Michael
St Pete Beach


Sent from my iPad using Cruisers Sailing Forum
KNOT'TÄ KLU

[sailnow2011]

Originally Posted by Lostkozz22

Where if florida are you?
Michael
St Pete Beach


Sent from my iPad using Cruisers Sailing Forum
KNOT'TÄ KLU

St Augustine

[Lostkozz22]

Going to see if it is comparable with what I have. in the process of refitting a 28,000#sailing catamaran that will be in charter
Michael


Sent from my iPad using Cruisers Sailing Forum

[Lostkozz22]

Why are you selling?


Sent from my iPad using Cruisers Sailing Forum

[sailnow2011]

Originally Posted by Lostkozz22

Why are you selling?


Sent from my iPad using Cruisers Sailing Forum

I got it, and intended to install it, but I went with a new custom twin hydraulic system for our 50' yacht, and the Garmin would not work well with that system.

[sailnow2011]

Originally Posted by Lostkozz22

Going to see if it is comparable with what I have. in the process of refitting a 28,000#sailing catamaran that will be in charter
Michael


Sent from my iPad using Cruisers Sailing Forum

What drive unit do you have? This will power almost any drive system.

[CaptWil]

Hi
Is it compatible with Garmin Chartplotter 520?
Rgds
Will

[sailnow2011]

Originally Posted by CaptWil

Hi
Is it compatible with Garmin Chartplotter 520?
Rgds
Will

Yes, actually the unit will function alone, but there is also the option to use a nmea0183 connection to the plotter from the GHC10 so it can be hooked up.

[CaptWil]

Originally Posted by sailnow2011

Yes, actually the unit will function alone, but there is also the option to use a nmea0183 connection to the plotter from the GHC10 so it can be hooked up.

HI
Looking into the GHP12 being N2K, how does it talk to my GPSMAP520S? Where can u see the option in the specs please?
Rgds
Will

[sailnow2011]

Originally Posted by CaptWil

HI
Looking into the GHP12 being N2K, how does it talk to my GPSMAP520S? Where can u see the option in the specs please?
Rgds
Will

http://static.garmin.com/pumac/GHC_10_OM_EN.pdf
Page 9 Under "Route to"
r
Route To
The autopilot steers the boat according to a route defined on your
chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA
0183 compatible chartplotter to use route to.

[CaptWil]

Ok so you are saying the GPH12 and the GHC10 are the same unit?
Sorry but trying to understand the confusing Garmin range.....
Rgds
Will

[NSboatman]

Sent you a PM. I will take it. Please call the ph number in the PM.

thanks-
bg

[sailnow2011]

Originally Posted by CaptWil

Ok so you are saying the GPH12 and the GHC10 are the same unit?
Sorry but trying to understand the confusing Garmin range.....
Rgds
Will

The GHC10 is the control head for the GHP12 and part of the kit.
So even if you didn't have a plotter, the GHC10 is what you would use to control it.

[sailnow2011]

Originally Posted by NSboatman

Sent you a PM. I will take it. Please call the ph number in the PM.

thanks-
bg

Replied