H5 AutoProp Hub

[markpj23]

This was on a Volvo Sail Drive. The blades are toast I'm afraid but the hub is in decent shape. One of the bearing races has a slight imprint of the ball bearings, but the race itself is smooth. I would have re-used it but did not want to spend the $$ for the new blades / balancing. I will include the old blades, one of which is useable.

If you have an AutoProp this could be a worthwhile spare. Prop was AP3824LH but will fit both RH and LH blades. This was a 16 inch diameter prop.

$250 plus shipping from 33573.



Hub end is fine: