For Sale: Kiwi props for sale

[Dave852]

For standard 30mm shaft. Includes 3 spare blades and manual. Purchased 2013 for $3000.00 new. Although both are usable, only one is in perfect condition. Purchase should be made assuming the second one will serve as a spare as one of the blades is stiff and I have not been able to figure out why. Perhaps the stud is slightly bent. $800 plus shipping.
Located Tavernier, fl USA

Sent from my iPad using Cruisers Sailing Forum

[Dulcesuenos]

Wish they fit a saildrive!

Sent from my PLT1077G using Cruisers Sailing Forum mobile app

[mike160871]

Do you know offhand if the kiwis are able to be adapted to a 1 inch shaft? What is the diameter of the props?
Thanks
Mike


Sent from my iPhone using Cruisers Sailing Forum

[Dave852]

Originally Posted by mike160871

Do you know offhand if the kiwis are able to be adapted to a 1 inch shaft? What is the diameter of the props?
Thanks
Mike


Sent from my iPhone using Cruisers Sailing Forum

Kiwi props are available in 1", mine are 30mm. The diameter is 18.5". Thanks for looking.


Sent from my iPad using Cruisers Sailing Forum

[mike160871]

Thanks for the reply. I doubt it's as easy as a solid prop but you can get a plastic sleeve to adapt bigger "solid" prop shafts to a smaller shaft (1.25 down to 1"). I'll contact the company and see.



Sent from my iPhone using Cruisers Sailing Forum

[Dave852]

Originally Posted by mike160871

Thanks for the reply. I doubt it's as easy as a solid prop but you can get a plastic sleeve to adapt bigger "solid" prop shafts to a smaller shaft (1.25 down to 1"). I'll contact the company and see.



Sent from my iPhone using Cruisers Sailing Forum

They might have a solution for sure, it would have to change the taper as well though.


Sent from my iPad using Cruisers Sailing Forum

[Heart of Gold]

30mm=1.18in

[Vamonos]

Originally Posted by Heart of Gold

30mm=1.18in

True. However, the metric shafts have an ISO taper of 1:10 while an SAE taper is 1:16. In addition, they have different key sizes.

[Heart of Gold]

So if the shaft measures 1 1/16, then it is probably a metric shaft? My friend has a CS 36 Merlin his measures 1 1/16

[robwilk37]

ill take them. email robwilk37@hotmail.com paypal or ? thanks

[Dave852]

Sold, thanks Rob.


Sent from my iPad using Cruisers Sailing Forum

[Freemind]

No 1 1/16 is 1.063
30 mm is 1.181