Cruisers Forum
 


 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 22-10-2013, 16:10   #1
Registered User
 
susswein's Avatar

Join Date: May 2012
Location: live in Utah, Sail in sea of cortez
Boat: Balboa 27
Posts: 174
Marine coatings and paint

I bought a pallet of dented can marine pains at an auction, and have no need for these. Please note that these are all new and unopened, but are either dented cans or dirty on the outside from other cans that leaked. Will sell cheap, trades considered.

1) 2 gallon cans of interbond 998 part B
2) 1 gallon can of devgrip 238 part B
3) 2 two quart cans of enviroline 405HT part B
4) 1 five gallon can of interthane 990 part B
5) 4 gallon cans of amercoat 240 cure
6) 2 gallon cans of Zinc Clad III HS organic zinc rich epoxy part A
7) 4 gallon cans of sigmarine 28 alkyd primer, US grey (one part)
8) 2 gallon cans of rustoleum DTM epoxy mastic (no activator)
9) 1 gallon can of devran 224V part B
10) 1 gallon can of DTM acrylic

steve_susswein@hotmail.com
susswein is offline  
 

Tags
marine, paint


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 22:19.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.