Need a mast

[vicman]

I have broken my 50 ft mast on a 37 ft Buchan, does anybody have a used one? Please help.

[ozskip]

I have a 49 ft mast with rigging and furller in the back yard but it will be just a bit too far away from you as we are the other side of the big pond.Greg

[vicman]

Let me look into shipping costs, it may be worth it. Where are you.

[vicman]

I read of another guy that is trying to get one from NZ, maybe we can team up with the cost of shipping.

[ozskip]

I am about 130km se from melbourne in south gippsland.victoria.australia.Greg

[mescalero]

I have a 30' aluminum one off a hobi cat.if you can find a 20footer you could weld them together. Im 76 years old and should know better, but i don't. anyway sorry bout your problem. maybe this will help. I also have a set of dacron sailes 20' buy 60'+. one 30'x60+ in very good shape.sell cheap. cause i don't have a boat.makes sense don't it? Im stuck in the mojave desert with 20 little outboards, in/out drives,trailers,etc and no water close by. having a good time pretending. see you later. gots to take my medication.

[sailboat man]

i got 42 foot that came off of a pearson and i need a 41 and half B and R mast to go on my hunter so if u know if any body got one let me know

[Alan Wheeler]

You guy's need to be aware that you can not just ask for a mast of X length. You need to ensure it is the correct weight. As in wall section. I am in that process right now. I have a 46ft mast about to be replaced because it is too light for the boat and rigging. Once the load comes on, the mast takes on an S bend shape. The mast to replace it with is much thicker and thus stronger. I will have a mast here soon that fits the lengths required by may of you asking for one, but I suggest it may not meet all the requirements. Be careful and be clear on what you need.

[sailboat man]

but if themast is the right height and weight but the only differnt is that the b&r mast has two lay back spread on it and the one i got has one spread on it that comes straight down the side of the mast can i mack two lay back spread and use it if every thing is the same