For Sale: NEW in box Harken Unit 1 Furling System

[Jimbo2010]

The Harken ESP Jib Reefing & Furling System is designed for the coastal cruiser or daysailer looking for an easy-to-assemble, efficient and reliable furler. Trim safely from the cockpit when it blows, unfurl when it goes light for a great day of sailing!
Features:

• Easy Assembly & Installation
  • Top foil offered in (5) pre-cut sizes to fit headstay length requirements
  • Bottom foil adjusts to fine-tune final length of unit – no hacksaw required
  • Shackle at tack and head attach sail to furler, with sail shape controlled by halyard tension
  • Marine eye and headstay wire pass through foil – no need to cut the wire during installation
• Stands Up to the Elements
  • Spool made from hard lube-anodized aluminum
  • Cover, flange and guard molded from glass-reinforced polymers for high strength
  • Foils clearcoat-anodized for exceptional durability
  • Rugged and reliable stainless steel sail feeder
• Choice of Long or Short Leg Kits to Adjust Drum Height
  • Choose long leg extension kit when using a turnbuckle with swage, Norseman or Sta-Lok® terminals
  • Long legs raise drum to clear anchor, reduce sail chafe and increase visibility
  • Removable clamp screws allow legs to pivot out of the way for easy access to turnbuckle
  • Select short leg extension kit when furler attaches directly to a marine eye at bottom of stay
  • Short leg allows headsail to be closer to deck

Specifications (ESP Unit 1):

• Typical Boat Length: 26 - 35 ft. (7.9 - 10.6 m)
• Headstay Length: standard 49' 11" (15.22 m) to max. 56' 6" (17.22 m)
• Headstay Diameter (Wire): 7/32", 1/4", 5/16", 9/32" (6, 7, 8 mm)
• Headstay Diameter (Rod): -6, -8, -10 (5.03, 5.72, 6.35 mm)
• Clevis Pin Diameter: 7/16", 1/2" (11 mm, 12.7 mm)
• Foil Type: single-groove round foil / stainless steel feeder
• Halyard and Tack Swivel Type: fixed
• Drum Type: fixed
• includes furling line

$1300
+ship cost

[sbrin]

PM sent