Beneteau 35.1 Oceanis Wiring Diagrams

[CharlieJ]

I am in the need of subject AC and DC wiring diagrams and a hard search of the web has not turned up anything. The diagrams in the have no detail.

Any ideas where I can find these?

[George_SD]

it would be in the owner's manual. If you don't have one - reach out to a dealer and they should be able to get you PDF version of it.

[CharlieJ]

@George_SD: The diagrams in the manual do not shave the level of detail needed.

[George_SD]

Hm, no - never seen a more complete diagram for these boats other than the ones in the manual. What are you specifically looking for? The drawings are basic, but should contain most information. The rest you may be able to figure out by looking at components and maybe tracing some wires.

I know that they don't show information such as what is going up the mast, which conduit, where they come out, etc. but AC/DC otherwise is reasonably shown.

After looking at my panel and cables - yes, some things are not fully documented and also appear to be done in strange ways (At least on DC side), but it's not too difficult to figure out for the most part.

I'm not an electrician, just trying to chime in since no one else is offering help.

[CharlieJ]

@George_SD
Thanks for the effort.

[Shrew]

Let's go back to the beginning. You have a problem, for which your next step is the most detailed wiring diagram possible. That is now your new problem, which has you moving further from the original problem.

I've had many boats and have never had a wiring diagram. Honestly, I'm not sure that it's needed. I've done significant maintenance and replaced just about every system at one time or another. I've never needed a wiring diagram.

I'll admit it's easy to loose oneself when looking at all the paths, but really, you only need to worry about the one circuit you're working on, and not the countless others that are running in parallel in the wiring loom or harness.

What is the problem you actually have?

[Shrew]

Originally Posted by Shrew

Let's go back to the beginning. You have a problem, for which your next step is the most detailed wiring diagram possible. That is now your new problem, which has you moving further from the original problem.

I've had many boats and have never had a wiring diagram. Honestly, I'm not sure that it's needed. I've done significant maintenance and replaced just about every system at one time or another. I've never needed a wiring diagram.

I'll admit it's easy to loose oneself when looking at all the paths, but really, you only need to worry about the one circuit you're working on, and not the countless others that are running in parallel in the wiring loom or harness.

What is the problem you actually have?

Disregard....I missed your signature:

ABYC Master Technician

[Stu Jackson]

Here's a start:


Beneteau Wiring Diagrams - Maine Sail's corrections - Just in case you have a friend with a Beneteau and want to help him with his unusual switching Reply #8

https://forums.sailboatowners.com/in.../#post-1456512