How to connect my propeller shaft alternator the right way.

[martoncic]

Dear Community now I have a question to you and hope, someone could help me.
*
I want to bring my not working shaft alternator to life, and I don't understand the wiring of the system.*
*
As first I brought the alternator to the repairing office, and the technician replaced the diodes, because they were burned.**He testet it with +, - and Ignition terminal and it is OK.
Now I have to connect it to my existing boat wiring.
On the side of the Alternator I have 5 wires. Plus and minus terminals, brown , red-violet and red (which is thicker).
On the control panel I have a key switch, ignition lamp and charging signaling lamp.
+,- it is clear where to connect. The other there wires I tried to figure out, how to connect them to make it work with my boat.

the previous owner told me, that when turning the key on, the ignition lamp starts burning. And that it stops burning at the moment, the alternator is beginning to charge and that the second lamp starts burning as prove that it is charging.

Now I have a wireingsheme of Amel, which is the brand of my Boat. I enclose it here. I made a Plan how to connect the wires to my alternator.

Has anybody experience how to connect it the right way, and if there are any issues that I was not thinking about, when making this plan?
Thank you very much for taking an Eye on that, and for any advice.

thank you very much, Marian

[martoncic]

Addition
I am attaching 4 Fotos whith purpose that you may see my wireingintentions. One is schematic, the next is back of the panel, the next is the regulator, and the last is the wireing of the alternator.