LiTime 12V 200Ah LiFePO4 Lithium Battery Dimensions

[HeinSdL]

Does anyone have/use exactly this battery?

If so I would be interested in knowing the exact length including the plastic handles (or rather, the strips through which the carrying ropes are threaded). The LiTime website is not clear and the battery will prove a tight fit so need to know this total, all in, measurement for the length.

Thanks for any help!

[flightlead404]

I have three of them with the "plus" bms. I'll be on the boat in a few days, will measure then.

[Chotu]

You need a 21” length to include the tabs for the handles.

The tabs aren’t essential. You could cut them off. The batteries are light and you could devise plenty of other ways to lift them.

9” vertical clearance with the terminal bolts in place.

[HeinSdL]

Originally Posted by Chotu

You need a 21” length to include the tabs for the handles.

The tabs aren’t essential. You could cut them off. The batteries are light and you could devise plenty of other ways to lift them.

9” vertical clearance with the terminal bolts in place.

So far so good then. 21" would be 53.3cm including the tabs, my box is 54cm. Worst case I indeed take a small saw to the tabs...

Thanks, also in advance to flightlead404 for double checking!

[Chotu]

Originally Posted by HeinSdL

So far so good then. 21" would be 53.3cm including the tabs, my box is 54cm. Worst case I indeed take a small saw to the tabs...

Thanks, also in advance to flightlead404 for double checking!

Ok, you will easily make it as I rounded up a couple 10ths of an inch also. Just to be sure.

They will fit in your box with the tabs for the handles.

[Chotu]

Also, I might add these batteries are working wonderfully for me.

[donradcliffe]

I just bought a LiTime 100 ahr battery, and I was surprised by its dimensions. I thought "drop in" meant it would fit in the standard group 24 or 27 battery boxes.

[Letterkenny]

So what are the dimensions without the handles?

[flightlead404]

Originally Posted by Letterkenny

So what are the dimensions without the handles?

Confirm 21” x 7 7/8” x 9 3/4” with mrbf

Handles add maybe 1/2” total or a little less if you dremel them off

[HeinSdL]

Originally Posted by flightlead404

Confirm 21” x 7 7/8” x 9 3/4” with mrbf

Handles add maybe 1/2” total or a little less if you dremel them off

Thanks! What is mrbf?

[flightlead404]

Originally Posted by HeinSdL

Thanks! What is mrbf?

Marine Rated Battery Fuse. go to rs-online look for eaton/bussman parts:

CFBAR2-M8XSP Accessory, Fuse Holder, MRBF, M8 Stud, 3/8" Mtg Hole, 2 Position

MRBF-300 300A fuse