Mastervolt MICC - Setting Adsorption Voltage

[PhilC]

Just installed a new battery bank and want to set the charge parameters on my Mastervolt MICC. Figured out how to set new capacity and float voltage but cannot find (despite reading the manual several times) how to set the adsorption voltage and temperature correction.

Anyone out there who has done this and can advise?

[smac999]

I don't think you can change the abosorb or float voltage from that panel. it's just a battery monitor.

what you probably saw was the "charged voltage" setting. which in the manual shows it as float voltage. But is a resycn setting for the monitor. nothing to do with the charger control.

if it's a newer masterbus charger you'll want the masterbus to usb interface. and masteradjust software

[AKA-None]

Yeah they should be more clear that you really need access to the interface and a windows pc if you’re going to make changes