Shore power relocation

[boatpoker]

Originally Posted by pas63

1. Mount it on the port side stern. The hood is a deep locker on the port side stern puts storage for the cable right at hand. The downside is wiring would have to run across the transom then forward on the stbd side to the breaker panel.

If you do this there must be primary breakers within 10' of the inlet or ...
the next survey will call it out.

[hjohnson]

Originally Posted by pas63

1. Mount it on the port side stern. The hood is a deep locker on the port side stern puts storage for the cable right at hand. The downside is wiring would have to run across the transom then forward on the stbd side to the breaker panel.

Friends of mine have a Moody 46. Their shore power inlet is on the top port corner of the transom. Seems to work pretty well for them. The ELCI breaker and isolation transformer are in the lazarett immediately forward of it. Works great.