Three way transfer

[F51]

I thought you needed to have both shore power inputs connected at the same time. Looks like this switch does one or the other, but not both.

[Blue Stocking]

Originally Posted by F51

I thought you needed to have both shore power inputs connected at the same time. Looks like this switch does one or the other, but not both.

A 4-pole switch will do that

[skipmac]

Originally Posted by F51

I thought you needed to have both shore power inputs connected at the same time. Looks like this switch does one or the other, but not both.

OP is going to use two switches, one for each panel. Swap feed to panel 1 from shore cord A to gennie to inverter. Swap feed to panel 2 from shore cord B to gennie.

[AnchorageGuy]

I need both panels connected on the genset only. Using this 3 way switch and a 2 way switch I already have will accomplish what I need to do. The 2 way will have shore power and genset to the air con electrical panel and the 3 way will have shore power, genset, inverter to the main electrical panel,