For Sale: 1979 Globe 38 Cutter Ketch $30,000

[bletso]

Here are some of her statistics.

Standing Rigging is all new, never been installed

Rig – Cutter / Ketch Sail area 900 sq ft (83 m2) Mast height 59 ft (17.9m)

Draft 6’3″(1.9m) Water 110 gal (400l) Diesel 50 gal (190l)

Power Plant – Perkins 4-108 50 hp SN# 108U119855 with 17/10 three bladed LH prop. 1 1/4 diameter shaft with standard 7/8-9 prop nut. Transmission appears to be a Borg Warner AS3-71CR Velvet drive with a 2.1:1 reduction unit.

LOA 37.5 ft (11.4m) LWL 32.5 ft (9.9m) Beam 11.8 ft (3.6m) Displacement 32000 lbs

Diplacement to LWL 416 Hull speed 7.64 kts Sail area to displacement 14.29

LWL to Beam 2.75 Motion Comfort 53.9 Capsize Ratio 1.45

GROUND TACKLE

220 ft 3/8 G7 galvanized chain
120 ft 1′ nylon – 120 ft 3/4 in nylon –200 ft 3/4 in nylon – 200 ft 1/2 in nylon

45# CQR – 50# Danforth – 25# Danforth – 25# HS Danforth

[Pontoonrob]

Where is the vessel?

[bletso]

Louisville KY. That is why it is discounted as the buyer will have to transport. Sorry about the bad link sailboatvigah.com. I had it on wordpress, bad decision

[Psy at SEA]

link not working mate!!

[Thomas1985]

Someone buy this boat immediately