Want To Buy: danfoss 4 pin controller

[ventura 38]

I have Adler barber cold machine with danfoss 2.5 compressor. i need a 4 pin controller. must be working must be reasonable

[Folie]

I also need a 4 pin controller. Does anyone know were I can get one??

[OldGreyB]

With all due respects, I assume you have read this CF thread
http://http://www.cruisersforum.com/...ed-119209.html

I note this as having successfully helped sailing friends after they have had unsuccessful "professional help" I agree with Richard Kolmann comments in post #13 [The problem is that no one wants to believe that its the wiring and not the module. It like you are blaming their boat (child) for the problem and I've had people almost beg me to buy a new controller because the thought of that is easier then troubleshooting their boat electrical system.]

I note Richard is still an active forum member and may be able to help if it is your module, at better prices than the commercial sites such as:

https://victory-products.com/products/ve-e254424

or
https://www.outbackmarine.com.au/null~1325

[Folie]

Your link (http://http://www.cruisersforum.com/...ed-119209.html) seems to have been abbreviated and doesn't work.

Yes-- I have reached out to Richard on this and he has been VERY helpful. He is a true expert.

Boat's wiring is out of the equation-- the AlderBarbour is sitting on my workbench in my garage, next to a good battery!! Unfortunately is acting just like it did on the boat.

Thanks very much for the links to the two vendors! I'm almost ready to buy! But am hoping to find a used one 'out there'!

[OldGreyB]

For completeness of this thread, the referenced thread is titled:
Danfoss Electronic Module - Help Needed under Engineering & Systems > Plumbing Systems and Fixtures:

The corrected CF link is posted here:
http://www.cruisersforum.com/forums/...ed-119209.html