Help! Rigging questions for a Allmand 23 sailboat

[WmMurnahan]

Not sure how to set up the roller fairing foresail and the club footed self tack inner sail on the cutter rigged sailboat. Never had a roller nor the club foot jib. I don't think I got the jib boom, would a whisker pole do? How do I run the lines. The genoa is off the roller, the roller has one metal wire that is wrapped around a drum attached to line on the mast. I have not pulled out the sails nor raised the mast yet. The one shot shows the mask step and two blocks on each side, it a cam cleat leading back on the starboard side. The other shot shows the bow. There is only the chain plate with two holes (the forestay has a chain plate out on the bow pulpit) the forward one seems from one picture I can find, to be for the inner forestay and the other is for the jib boom, just not sure what kind of attachment the boom would have, the clip type of a whisker pole would not hook into the hole.

[Greatest Lakes]

Staysail is attached to the deck at the point behind the bowsprit, and the jib is near the end of the bowsprit. Jib lines are ran in front of the stay for the staysail on either side and the sail slides past on either tack. The staysail uses the 2 blocks to either side of the mast step. Staysail boom should have a small chunk of wire or rope that attaches it the the second mounting hole on the deck fitting. The halyard holds it up with the sail.