Trintella 45 owners

[wanabe cruiser]

Dear All, are there any Trintella 45 owners in the group please, who can advise on the deck core construction of this design from 1986/1987?
Thanks Simon

[DDabs]

Info I pulled from a 1984 Trintella 45 listing:

"Hull & Deck: The hull is built of hand laid solid FRP construction including longitudinal stringers for internal reinforcing. 3 water tanks integral with the hull. Each equipped with a large clean out plate and VDO level gauge. The flush deck is a single unit, FRP laminate with balsa core and plywood in high stress areas. The deck, cockpit sole and seats are surfaced with 5/8 strip teak laid in rubber compound. The cabin house has a molded non-skid surface. The aluminum toe rail/hull to deck joint is overlapping with Thiacol bonding and fastened with s/s bolts. The exterior lead keel is bolted to the hull with SS fastening and fiberglass into the hull stab. Rudder shaft is solid SS tapering from 4 to 2 and rudder has s/s reinforcing web filled with high impact foam and covered with FRP laminate."

Not sure how this changed after 1984. P.S.- Trintella 45, what a badass flush deck sailboat!