Another Cheapest Place to Store a Catamaran Thread (eastern USA)

[Chotu]

Thanks for all the responses so far. I have a good number of places to check with now.

It’s pretty much decided. I’m going to kick the can down the road a bit and not close the door on this boat just yet.

[LittleWing77]

Originally Posted by Chotu

My boat is different.

It was built to be in the water indefinitely.

No zincs. No metal below the waterline. No through hulls. You could even drill a hole in the bottom of each hull and it wouldn’t sink.

The 1” (25mm) foam core and ultra light weight nature of the boat makes it positively buoyant. You can cut a piece of the hull off and toss it in the water. The flat panel you cut off floats VERY high in the water like a piece of foam insulation.

It’s also made out of epoxy so there is no osmosis possible.

Originally Posted by Chotu

I’m going to kick the can down the road a bit and not close the door on this boat just yet.

Fantastic news, Chotu!

Just reading all the attributes and thought that has gone into the design of your boat only reinforces (for me) that this decision warrants much contemplation...

Good luck!
LittleWing77