Installation Raymarine Radar to Leopard 40

[Piscis]

We will install the Raymarine Q24W Radar to our 2017 Leopard 40.

Planning a mast install, well below the spreaders. The unit will connect with wifi to the main unit, an Axiom 9. So only power cables needed, no data cables.

Anybody did this job already and can share some tipps? Especially routing the power cable inside the mast in the OEM conduits? And how to take off the ceiling pannels without damaging them? Where and how to route the cable to the main power supply and switch pannel...

I am not at the boat at the moment. So i am trying to collect as many infos as possible to be prepared for the job.

Pictures would be higly appreciated!

Thanks a lot

John

[Tin Tin]

Try the Leopard Owners on Facebook if not already done so.

[Piscis]

Thanks. Did already.

Still trying to get some more DIY infos, especially pictures, procedures on how to route the power cable...

John