Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Engines and Propulsion Systems
Reload this Page Hynautics Engine Controls - Any Traps to Be Aware of ?
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 21-10-2010, 15:29   #1
Registered User
 
cat man do's Avatar

Join Date: Aug 2006
Location: Brisbane Australia [until the boats launched]
Boat: 50ft powercat, light,long and low powered
Posts: 4,409
Images: 36
Hynautics Engine Controls - Any Traps to Be Aware of ?
Just purchased some second hand Hynautics controls for less than 10% of new price and have given them a clean up and they all appear to be in good condition underneath the old paint and grime.






I have the fluid reservoir to clean up today and am wondering if there is anything I should be doing to them before installation.

They all seem to be tight and smooth, no wobbles, positive sucking sounds when levers and actuators are moved.
Is there anything that needs service or replacement apart from lines and "O" rings, before installation?
__________________
"Money can't buy you happiness but it can buy you a yacht large enough to pull up right alongside it"...............David Lee Roth
Long Distance Motorboat Cruising – It Is Possible on a Small Budget
cat man do is offline   Reply With Quote
Reply

Tags
engine

« Parts for Perkins 4-154 | Air Leak and Lift Pump, 2GMF »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Single Lever Engine Controls Weyalan Engines and Propulsion Systems 17 15-10-2013 21:48
Luperon? Be Aware... shingani The Sailor's Confessional 7 03-02-2010 11:06
SL3 Engine Controls - Help! Want to sail Engines and Propulsion Systems 2 18-06-2009 00:03
Engine controls install inside or outside ? ribbony Engines and Propulsion Systems 16 17-04-2008 15:02
Electronic Engine/Gear Controls DHHong Kong Engines and Propulsion Systems 7 26-03-2007 03:05

Advertise Here


All times are GMT -7. The time now is 21:05.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.