Perkins 108

[Victor Climber]

Simple question really.should the Banjo bolt on the lift pump have holes in the top..just taken mine off and it hasn't ..thank you ..

[MWGDVC]

VC,
Not quite sure what you mean by the top. Banjo bolts usually are hollow shank, with a hole in the side near the hex head, to allow fluid to flow to/from the fitting, from/to whatever it is screwed into. Perhaps debris has clogged the hole?

[Victor Climber]

This bolt has no holes near the top but is drilled out in the middle.cant find anything on line if it should be drilled out near the top