Universal 5424 Injector Nut Size

[Snore]

Well it seems after 40 years of use my injectors need some servicing. Since new Kubota injectors cost about $80. The plan is remove
These and install Zennoh injectors for the Kubota dh1101

Now the problem. The nut that holds the fuel line on is 11/16 (will be buying a split box that size). The nut under the fuel bypass fitting is 3/4” (will use a socket on that).

I do not have a wrench to get the size of the injector nut itself. I would like to go to Kubota with a compete assembly so I am sure to have the right bits and pieces.

Anybody know the size of the fitting the pencil is pointing at?

[GordMay]

I didn't see any nut sizes, but a closer study may reveal them.
Service Manual: M-20, M-30, 5416, 5424
➥ https://www.westerbeke.com/technical...hnical_man.pdf

[Snore]

Originally Posted by GordMay

I didn't see any nut sizes, but a closer study may reveal them.
Service Manual: M-20, M-30, 5416, 5424
➥ https://www.westerbeke.com/technical...hnical_man.pdf

@GordMay thanks for checking. I have the dang shop manual and couldn’t find it. Got the answer over on Anarchy. 27mm.