Cabinet door hinge

[MV Wanderlust]

Anyone familiar with this probably-common cabinet door hinge? We have several and a couple are loose or out of adjustment and the doors sag a little. You can lift up and back slightly to cause the hinge to drop back in place and the door to close normally. The screws that attach the hinge to the door and to the cabinet are all tight. I'm hoping it's just an adjustment and someone can tell me how to do it.



Thanks.

John

[sailormed]

You can adjust height with the 2 screws in the cabinet, the upper and lower. They are now in the middle of an elongated vertical hole. Hope the play is enough for your case.
If the hinges are to old, they are common in all mass produced furniture, IKEA and others will have them on stock, just check door thickness and hole diameter match.

[Dsanduril]

This might be useful:

https://www.youtube.com/watch?v=56cqwMnKRz0

[roberttigar]

These are common hinges. Home depot sells a version. The premier maker is Blum. I replace mine at a cabinet parts dist in Ft Lauderale named Richelu. They are about $3-4 per hinge. But there are many (dozen's) of variations. If you are going to replace them, pull the hinge and take it with you. Bob