Supplier of rubber Moldings

[rwells36]

My vessel is 15 years old and needs a variety of rubber moldings (doors and windows) replaced. Widths are 1/2 in to 5/8 once in size. Any links to distributors or suppliers is greatly appreciated.

[Jim Cate]

RW, it might encourage responses if you told us where you are located. I can direct you to sources in Australia...

Jim

[rwells36]

Originally Posted by Jim Cate

RW, it might encourage responses if you told us where you are located. I can direct you to sources in Australia...

Jim

Location is FL

[SVTatia]

Try McMaster Carr

https://www.mcmaster.com/#rubber-molding/=16anlt0

[rwells36]

I found the perfect solution on eBay.

[FPNC]

barbourplastics.com

[Scott Berg]

We've found a wide range from http://www.jcwhitney.com/ as well

[dfelsent]

https://www.crlaurence.com/

Wholesale, but they will refer you to a diistributor.

[rwells36]

I ordered a "sample ring" of about 75 different vinyl splines and one of them worked (been a few weeks of searching). CL Laurence makes it. Thanks for everyone's contribution to this thread.

[Hudson Force]

My source for most applications of extruded rubber rails and gaskets in the US is Griffith Rubber Mills.