Value of thicker Plexiglas in fixed lights?

[Lou-In-NJ]

A lot of great suggestions. Yes, I will be going bronze again. However, I was going to use the 3M tape to install the lights, I have seen adhesives used, and if the tint isn't dark enough, it can look like a pretty bad caulking job. THis was the procedure I was going to use:

https://www.youtube.com/watch?v=MQyjxVUskd8

[mark maulden]

Interesting..a lot of the window plastic area on S2s is not see through as it is adhesive area. So when you look at the periphery, you look at a lot of area that has tape. I'm not talking this down rather I’m interested in how it turns out!

[Lou-In-NJ]

Originally Posted by mark maulden

Interesting..a lot of the window plastic area on S2s is not see through as it is adhesive area. So when you look at the periphery, you look at a lot of area that has tape. I'm not talking this down rather I’m interested in how it turns out!

I'll post picture of before and after; but that won't be until April...stay tuned...

[marcjsmith]

Lou. I followed that video when I redid the fixed lights on my moody this past April
Th vhb tape is very aggressive. You get one shot at alignment...

So far one season with no problems