Where to find hinges

[Mirage35]

I've got a couple of broken cockpit locker hinges that I'd like to replace with identical or similar, but can't find them. Can't figure out how to rotate the photo but you get the idea. The 4 3/8" length seems to be an odd one.

Anybody have good sources? Prefer Canada but can deal with US. Further than that gets complicated.

[Stu Jackson]

Home Hardware has a good assortment. Doesn't need to be "marine", just good quality. Good luck.

[Mirage35]

Stu, thanks for pointing out what should have been obvious. I sometimes miss that.

[henryv]

You may find what you need at spaenaur.com they are in Canada and they have a great selection of products.

[Terra Nova]

West Marine carries that style of hinge.

[US1Fountain]

Perhaps this is the same bolt dim. It appears to have less material past the outer holes than yours, but the holes may be at same location.

https://www.whitecapindustries.net/products/s-604

[Mirage35]

I’ll keep looking, but what I’m seeing from everyone’s ideas is that four inch is the standard now. (A local chandlery told me that’s what the factory in China produces and that’s what everyone sells.)

My 4 3/8” may have been standard 30 years ago when the boat was built, but isn’t easy to find now. I may have to bite the bullet, fill the existing holes, and install something else.

Thanks all for the suggestions.

[goat]

Something like this maybe?

https://ca.binnacle.com/product_info...oducts_id=1593

You'd be hard pressed to find anything with matching holes. I see whipping up some epoxy in your future.

goat