Visit our Popular Forums

Pirate007 · 28-12-2019, 14:05

Small cockpit table that could also be used as a flip up table in the salon, galley, engine room, motorhome(?), anywhere you need a solid fiberglass flip up table. Has fiddles with drains but is not a folding leaf type table. Edson bracket round ends could be cutoff to allow the bracket to mount to a bulkhead rather than to a pedestal tube.

Measurements are:
- Table is 22.5"L x 12"W x 1.5" Thick including fiddle height.
- Edson bracket is approx. 12.5" on centers to fit a standard Edson pedestal guard. Will work with pedestal tubes up to 1 inch. I also have a pedestal tube drill guide for $20.00 additional.

Table looks like it is new, comes with Edson pedestal brackets that also look like new with no screw head scratches in the bracket mounting holes. Color is a light cream similar to Island Packet boat color.

Price $195.00 + shipping, or pickup in Palmetto, FL. I will provide shipping cost to your zip code, assume residential delivery, assume ground service.

PayPal to my email address, or cash only.

Please don't bother sending low ball offers.

Note: I do have a brand new custom teak table with folding leaf's and other teak accessories that I will post in another ad.

Pirate007 · 31-12-2019, 04:13

Price reduction: $165.00

WSMFP · 31-12-2019, 05:03

Im interested in the teak table when you get that ad posted.

Pirate007 · 31-12-2019, 05:07

Quote:

Originally Posted by WSMFP

Im interested in the teak table when you get that ad posted.

Thanks for the request WSMFP. I will post the pictures for the teak table and other teak items tomorrow late afternoon or Thursday.

Happy New Year!

Pirate007 · 02-01-2020, 08:36

Quote:

Originally Posted by Pirate007

Thanks for the request WSMFP. I will post the pictures for the teak table and other teak items tomorrow late afternoon or Thursday.

Happy New Year!

Hi,
Items have been posted on CF.

Cheers,
John

WSMFP · 03-01-2020, 05:12

Noted and thanks but I'm going to pass.

Pirate007 · 03-01-2020, 08:32

I was able to upload the installation example pictures in this thread. Note that for the ends of the U Bracket you will need to determine what is best for your installation, i.e. saddle clamps, P clamp (picture shows a nylon example but should be sst), install teak blocks for the U bracket to wedge into, etc.

Obviously the picture is looking at the bottom of the table and the U bracket not aligned, just taped in place for pictures. There is a leveling screw on the pedestal white bracket to set the fore-aft level. Initial installation should keep the leveling screw mid-position to provide fore-aft up-down alignment as required.