[SOLD] Harken 32mm "Big Boat" Traveler gear. 4:1 Main Forced Car and End Controls.

[Standbly]

I listed these items on eBay as well so if you want to use eBay's money back guarantee, it's listing 142957859188. A direct sale through this forum will be cheaper.

The location of this winch tuner is in Jacksonville Florida. The price is only $225.-


On sale:

- "Forced Harken Main Traveler Car". It's the 32mm "Big Boat" car with 4 pully's and a stand-up toggle!
- 75mm ball bearing pully
- Two end control's. Double pully's!

Just add the Harken "Big Boat" track and a set of Harken Big Boat balls and you're done. This is your chance to install a 4:1 system that costs way more than 1500 dollars for only a fraction of the costs. It's used but it's perfect and will go just as well!

What would you need to finish a complete Harken big boat 32 main traveler system?
- Track (3ft for about $100).
- Set of balls $30 at West or a kit $72 with the tool.
- Cleats or winches to control the traveler lines.

[piloto]

Hi again. I’d be interested in these for $200 if you can box them up and send usps to USVI (shipping cost same as ground in continental US). I will pay the postage of course.

[Standbly]

Hmmmz. I thought 225 was a VERY good deal...


You know what, I can sell you the traveler set for 200 but without the mainsheet pully. Without the pully it'll fit in a flat rate box, which is cheap to ship.

[piloto]

Sending PM

[glcalahan]

Hello,

Is this still available? Where are you shipping from?

Thanks

[Standbly]

Sold on 9 oct 2018 through cruisersforum